Press Brake Machines and Metalworking Equipment Supplier
in Yemen
Yemen’s fabrication sector is rebuilding steadily, with demand rising for structural steel, storage tanks, water infrastructure, and agricultural equipment as reconstruction programmes move forward across the country. Energy Mission Machineries manufactures and exports press brake machines, shearing machines, and plate rolling machines built for exactly this kind of environment: workshops that need dependable output without relying on constant technical support or uninterrupted power supply.
Our machines are engineered with rugged hydraulic systems, simple control interfaces, and components sourced from established European and international brands, so fabricators in Yemen can keep production running even where grid power and service access are inconsistent. From small workshop operators to contractors supplying reconstruction projects, our equipment is built to work hard with minimal downtime.
Press Brake Machines in Yemen
Sheet and plate bending is central to nearly every fabrication job in Yemen right now, from water tank frames and agricultural sheds to structural brackets for rebuilding projects. Energy Mission’s press brake range covers hydraulic, NC, and full CNC options so workshops can choose a machine that matches their power supply, skill level, and budget, rather than being forced into complex electronics they cannot maintain locally. Every machine ships with a frame built and tested to IMTMA standards, giving fabricators in Yemen a bending solution that holds accuracy through years of continuous use.
CNC Press Brake Machine in Yemen
For fabricators in Yemen supplying larger reconstruction contracts, such as prefabricated steel structures, tank shells, and export-grade components, a CNC press brake machine removes the guesswork from repeat bending jobs and reduces material waste on expensive imported steel. Energy Mission builds six CNC press brake series, each suited to a different scale of operation.
The Optima series covers 25 MT to 325 MT capacity across bed lengths of 1250 mm to 8000 mm, using servo motor plus hydraulic pump drive on the Y1 and Y2 axis that cuts power consumption by 45 to 50 percent, a meaningful saving in a market where diesel generator running costs matter. It runs on the CybTouch 8PS controller from CYBELEC, Switzerland, with a rigid upper beam on 12-point roller bearings and a frame machined on a Floor Boring Machine for long-term accuracy.
The Splendid series (30 MT to 400 MT, 1250 mm to 8000 mm) offers similar energy savings of 40 to 45 percent with the same CybTouch 8PS control platform, suited to workshops wanting CNC precision at a lower entry cost.
The Efficient series scales up to 2000 MT for heavy plate work, with an ultrasonically and tensile tested IS:2062 grade steel frame and quick V-groove changeover, useful for tank and pressure vessel fabricators.
For very long structural members used in tower and pole fabrication, the Tandem/Tridem series synchronises two or more press brakes under one controller, covering lengths up to 24000 mm, while the Magnum series (100 MT to 2000 MT) adds deeper throat depth for complex bends. Smaller workshops can start with the Prudent series, 25 MT to 160 MT, running on an ESA S630 controller from Italy with manual crowning.
All CNC series use servo hydraulics from HAWE Germany or ATOS Italy and an AC servo backgauge on hardened ball screw and LM guides. To get pricing and lead times for shipment to Yemen, request a quote here.
Hydraulic Press Brake Machine in Yemen
Where power reliability or local servicing capacity is a bigger concern than automation, a conventional hydraulic press brake machine remains the most practical choice for many fabricators in Yemen. It requires less specialised electronics knowledge to operate and maintain, and it holds up well under the kind of continuous, high-volume bending work seen on reconstruction and infrastructure sites.
Energy Mission’s Hydraulic Press Brake is available from 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed length. It uses a rear cylinder design with compact cylinders and a low-pressure hydraulic system for better rigidity and fatigue resistance over years of use, plus positive synchronisation through a welded torque tube for consistent bend angles across the full length of the beam. Repeatability is rated at plus or minus 0.05 mm, adequate for most structural and general fabrication work.
The frame is built from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards, and the machine includes a ram tilting arrangement to preserve bending accuracy as the machine ages, an important feature for buyers who expect to run the machine for a decade or more without replacement. Fast approach and return speed with a slower, controlled pressing speed protects accuracy without slowing production unnecessarily.
Standard equipment includes an unhardened multi-V die and semi gooseneck punch, front manual backgauge with micro-adjustment fingers, lead screws, double rod guides, and chain drive synchronisation, everything a workshop needs to start production immediately. Because the machine is designed for on-site NC upgradation later, fabricators in Yemen who start with the base hydraulic model can add digital positioning as their operations and budgets grow, rather than having to buy a new machine outright. Optional upgrades include a multistep DRO from DELTA, hardened and ground segmented dies, and a motorised backgauge with DRO from HENGSTLER, Germany.
This is the machine we recommend most often for workshops in Yemen prioritising durability and simple maintenance over full automation. Enquire about the Hydraulic Press Brake here.
NC Press Brake (Front Cylinder) in Yemen
An NC press brake with front cylinder design gives fabricators in Yemen a middle ground between manual hydraulic operation and full CNC control, adding digital backgauge positioning without the cost or complexity of a multi-axis servo system. It suits workshops producing repeat parts, such as channel sections, brackets, and enclosure panels for infrastructure and utility projects, where consistent hole and bend positioning saves time on every job.
The NC Press Brake (Front Cylinder) is built from 30 MT to 600 MT capacity, 1250 mm to 8000 mm bed length, with a frame manufactured from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards. Repeatability is held to plus or minus 0.03 mm, tighter than the standard hydraulic model, and cylinders are positively synchronised through a welded torque tube. The machine runs fast approach and return speed with a slower, controlled pressing stroke, protecting bend accuracy without wasting cycle time.
Hydraulic cylinders use seamless honed tube construction with hardened and chrome plated piston rods and twin-type zero-leak PU seals, built to resist wear from dust and heat, both common challenges for machinery operating in Yemen’s climate. The standard controller is an Estun E-21 for the X-axis, with the backgauge running on ball screw and guide rod for consistent, repeatable positioning.
Because this model supports on-site NC upgradation, workshops can start with the base configuration and later add an ESTUN E200/300 controller, a Schneider controller, or a CYBELEC TOUCH 8P controller, plus hardened and ground segmented dies and punches, quick release clamps, or Allen key type clamps, as production volumes justify the investment. This flexibility makes the front cylinder NC press brake a sound long-term purchase for growing fabrication businesses. Get a quote for the NC Press Brake (Front Cylinder).
NC Press Brake (Rear Cylinder) in Yemen
The rear cylinder NC press brake is built for fabricators in Yemen who need genuine two-axis digital control, both bend angle and backgauge position, without stepping up to a full CNC system. It is particularly well suited to workshops running mixed batch production, where jobs change frequently but still require accurate, repeatable bends.
The NC Press Brake (Rear Cylinder) covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths. It runs on a Cyb Touch 8P touchscreen two-axis controller from CYBELEC, Switzerland, displayed on a 5.7 inch colour graphic LED backlit screen, controlling both the Y-axis bending degree and the X-axis backgauge. Operators can store up to 200 programs, with as many as 24 bends and individual backgauge positions saved per program, useful for workshops that repeat the same product runs for infrastructure or utility contracts.
Backgauge position accuracy is held to 0.1 mm, and the machine includes programmable backgauge retraction, angle correction, backgauge correction, open height per bend, and a job counter, giving supervisors better visibility over shop floor output. A 5-micron accuracy press brake scale on the Y-axis delivers repeatability of plus or minus 0.03 mm, and the high speed AC servo backgauge rides on hardened ball screw and LM guides with timer belt drive. The backgauge finger includes micro adjustment on a double LM guide for the Z-axis, useful when switching between part types during a shift.
This machine is well suited to sample production runs that later scale into mass production, since changeover between jobs is fast and program recall is instant. Optional upgrades include a Force Control Module, a DA-41T Delem NC controller, quick release clamps, and hardened and ground segmented dies. Request pricing for the NC Press Brake (Rear Cylinder).
Shearing Machines in Yemen
Clean, straight cuts are the starting point for every fabrication job, and Yemen’s reconstruction and infrastructure sector depends heavily on shearing machines that can cut mild steel and stainless steel sheet reliably, day after day, without frequent blade changes or calibration work. Energy Mission’s shearing range spans hydraulic, CNC, and NC control levels, all built around a rigid box-type structure and four-edge interchangeable hardened blades that reduce running costs over the life of the machine.
Hydraulic Shearing Machine in Yemen
The Hydraulic Shearing Machine, part of our HVR series, is a guillotine-type machine with a hydraulically variable rake angle, giving fabricators in Yemen the flexibility to cut thin sheet with a lower rake angle for twist-free results, or switch to a higher rake angle for higher cutting capacity than the machine’s rated thickness. This adaptability matters for workshops handling mixed material orders, from light gauge roofing sheet to heavier structural plate, on the same machine.
The structure is a rigid box-type design for both ram and table, with an inclined member aligned to the direction of resultant cutting force, reducing deflection and extending machine life under continuous use. Blades are four-edge interchangeable HcHCr hardened and ground steel, suitable for both mild steel and stainless steel, and the blade gap is pre-calibrated for automatic adjustment, so operators get burr-free cuts without manual fine-tuning. The ram is guided by six hardened ground guide rollers for consistent cut quality across the full table width, and the holding cylinder uses a sandwich bolted square box design that simplifies maintenance, an important factor where spare parts and service technicians may not be immediately local.
Electrical panels use Siemens, Schneider, or BCH components, and the machine includes hydraulic and electrical safety interlocks against overloading. Optional backgauge upgrades include a single step motorised backgauge with DRO from HENGSTLER, Germany, a multi-step motorised backgauge with touchscreen DRO from DELTA, Taiwan, or a high speed NC backgauge with VFD from Schneider, along with a ball transfer table for faster sheet loading. The machine also supports on-site NC upgradation later. Enquire about the Hydraulic Shearing Machine.
CNC Shearing Machine in Yemen
For higher throughput operations, particularly contractors cutting standardised plate sizes for tanks, structural sections, or export orders, the CNC Shearing Machine automates positioning and cutting sequences to a degree the hydraulic model cannot match. It uses the same hydraulically variable rake angle blade system as the HVR series, but adds a servo-driven backgauge with positioning speed up to 500 mm per second and repeatability of plus or minus 0.1 mm.
The CNC touchscreen controller stores hundreds of cutting programs, letting operators recall a job instantly rather than resetting the backgauge manually each time, a real time saving for workshops running varied production for reconstruction and utility contracts. Blade gap compensation is automatic and adjusts by material thickness, maintaining cut quality across different plate gauges without operator intervention. Multi-step programmable backgauge sequences allow a single sheet to be cut into several different widths in one continuous run, and an optional ball transfer table speeds up loading of heavier sheet.
This machine suits fabricators in Yemen scaling up from manual operations toward higher volume, standardised production, where the labour and material savings from automation justify the additional investment over a hydraulic model. Get a quote for the CNC Shearing Machine.
NC Shearing Machine in Yemen
The NC Shearing Machine sits between the hydraulic and CNC models, adding digital backgauge positioning without the full programmability of a CNC system, a practical choice for workshops that want repeatable accuracy but do not need hundreds of stored programs. It runs on an NC backgauge with DRO, available as a HENGSTLER, Germany single step unit or a DELTA, Taiwan multi-step unit, with backgauge positioning accuracy of plus or minus 0.1 mm.
Operators can store up to 25 step positions in a multi-step program, useful for repeat cutting patterns common in structural fabrication and tank manufacturing. Like the rest of the shearing range, it retains the variable rake angle for material versatility and four-edge interchangeable HcHCr blades for long service life between sharpening. Because the machine is NC upgradable from the hydraulic base model, fabricators in Yemen can start with a standard hydraulic shear and add NC positioning later as production needs grow, protecting their initial investment.
This progressive upgrade path is particularly useful in Yemen’s current market, where workshops are scaling operations gradually as reconstruction contracts increase in size and frequency. Request pricing for the NC Shearing Machine.
Plate Rolling Machines in Yemen
Water storage tanks, pipeline sections, and pressure vessels are core to Yemen’s ongoing infrastructure and utility rebuilding work, and all of them start with accurately rolled plate. Energy Mission’s plate rolling range covers 3-roll and 4-roll configurations built from alloy steel rolls, with hydraulic control systems designed for consistent results even when operators are still building experience with rolling work.
3 Roll DP Series Machine in Yemen
The 3 Roll DP Series is a pyramid-type plate rolling machine handling 6 mm to 80 mm plate thickness across working widths of 1500 mm to 4000 mm, sized to match the tank and structural fabrication work common on Yemen’s reconstruction projects. The top roll stays fixed while both bottom rolls move independently via separate hydraulic cylinders, giving operators fine control over the rolling curve, and both bottom rolls are power-driven through a planetary gearbox with hydraulic motor for consistent torque during the roll.
Rolls are made from alloy steel, and the machine includes a double pre-pinching arrangement, reducing the flat, unrolled section left at each end of the plate, a common source of rework on basic rolling machines. A built-in cone bending attachment adds versatility for tapered sections sometimes needed in pipeline and tank work, and the hydraulic dropper end makes removing finished cylinders straightforward without needing a crane for every job. Overload protection guards against operator error damaging the machine, and digital readout on both bottom roll positions helps operators repeat settings accurately across a production run. A manual centralised lubrication system keeps maintenance straightforward for workshops without a dedicated maintenance team.
Standard equipment includes an extended shaft for profile bending and digital readout, while optional upgrades include hardened and ground rolls, automatic lubrication, a material feed table, NC controls, side and top support for large diameter work, top roll drive, and interchangeable top rolls. Enquire about the 3 Roll DP Series.
3 Roll HM Series Machine in Yemen
The 3 Roll HM Series uses a hydraulic initial pinch design, giving fabricators in Yemen minimum flat end pre-bending capability, useful for tanks and vessels where a tight, uniform curve from end to end matters for welding and structural integrity. Hydraulic top roll side movement allows conical rolling for tapered components, and each roll position is controlled independently through hydraulics for precise adjustment during the job.
Both drive rolls are powered, delivering uniform torque distribution through the rolling process and reducing the risk of plate slippage that can distort a cylinder mid-roll. Rolls are made from high-tensile alloy steel, precision ground for consistent surface contact with the plate, and the hydraulic dropper end simplifies part removal once rolling is complete. NC position control with digital display comes standard, with a full CNC upgrade available for workshops planning to scale toward higher precision, higher volume production over time.
This machine is a strong option for contractors supplying pressure vessel and tank fabricators in Yemen who need tighter tolerance rolling than a basic pyramid-type machine can offer. Get a quote for the 3 Roll HM Series.
4 RL DP Series Machine in Yemen
The 4 RL DP Series uses a four-roll design, a fixed top roll, a pinch roll, and two independent side bending rolls, allowing single-pass pre-bending of both plate ends without reversing or re-feeding the plate. For fabricators in Yemen running production shifts on tight reconstruction project deadlines, this cuts handling time significantly compared to a 3-roll machine, where each end typically needs a separate pre-bending pass.
Position control for all four rolls can be specified as CNC or NC, with digital position readout across all rolls so operators can repeat settings precisely between jobs. Each side roll is controlled independently through hydraulics, and the top roll and pinch roll are both driven, delivering the torque needed for heavier plate without slippage. Rolls are manufactured from high-tensile forged alloy steel, hardened and precision ground, built to hold accuracy over years of continuous industrial use. A hydraulic dropper end simplifies removal of the finished cylinder, and CNC side roll position control enables accurate conical rolling for tapered sections.
This is the machine we recommend for higher-volume tank and pipe fabricators in Yemen who need to maximise throughput without sacrificing plate-end accuracy. Request pricing for the 4 RL DP Series.
Frequently Asked Questions
1. Does Energy Mission export press brake, shearing, and plate rolling machines directly to Yemen?
2. What happens if a machine needs a spare part or service support in Yemen given the current infrastructure challenges?
3. Can a hydraulic press brake or shearing machine be upgraded to NC or CNC later once my workshop in Yemen scales up?
4. Which machine is best suited to unreliable power supply conditions in parts of Yemen?
5. What is the typical lead time and shipping process for machinery ordered for delivery to Yemen?
Contact Energy Mission for Metalworking Equipment in Yemen
Whether you are equipping a new fabrication workshop or expanding capacity to meet reconstruction and infrastructure demand, Energy Mission can recommend the right press brake, shearing, or plate rolling machine for your operation in Yemen. Our team will review your material thickness, production volume, and site conditions before recommending a configuration. Contact us here to request a quote and shipping timeline.