Press Brake Machines and Metalworking Equipment Supplier
in Israel
Israel’s manufacturing base combines precision engineering with high-volume general fabrication, spanning automotive component suppliers, agricultural equipment manufacturers, HVAC and construction metalwork around Tel Aviv and Haifa, and a dense cluster of industrial workshops supplying both domestic and export markets.
Energy Mission Machineries supplies press brake machines, shearing machines, and plate rolling machines to fabricators across Israel who need tight repeatability and fast changeover between jobs, both essential for suppliers working to the demanding tolerance specifications common in this market.
Our CNC press brake range, built with CYBELEC Switzerland controllers and servo hydraulics from HAWE Germany and ATOS Italy, is engineered for exactly this kind of precision, repeat-part production, while our hydraulic and NC ranges serve general fabricators producing structural and enclosure work.
Press Brake Machines in Israel
Israeli fabricators, whether producing automotive brackets, agricultural equipment panels, or construction and HVAC components, generally need press brakes that hold tight bend accuracy across long, repeat production runs. Energy Mission’s press brake range covers CNC, NC, and hydraulic control, with frames machined on a Floor Boring Machine and mounted on a 12-point roller bearing upper beam, giving fabricators in Israel the precision and consistency their downstream customers expect.
CNC Press Brake Machine in Israel
Fabricators supplying Israel’s automotive, agricultural equipment, and precision manufacturing sectors need press brakes with tight, repeatable bend accuracy across varied part geometries. Energy Mission’s CNC press brake range spans six series to match different production scales.
The Optima series runs 25 MT to 325 MT across 1250 mm to 8000 mm bed length, with servo motor plus hydraulic pump drive on the Y1 and Y2 axis cutting power consumption by 45 to 50 percent, and beam speed up to 220 mm per second approach, 16 mm per second pressing, useful for high-throughput repeat production. It runs on the CybTouch 8PS controller from CYBELEC, Switzerland, with an optional automatic angle measurement upgrade for tighter part-to-part consistency.
The Splendid series (30 MT to 400 MT) delivers 40 to 45 percent energy savings with the same control platform, and the Efficient series scales up to 2000 MT for heavier plate work, with a frame built from ultrasonically and tensile tested IS:2062 grade steel.
For longer structural members used in construction and infrastructure work, the Tandem/Tridem series synchronises two or more press brakes under one controller for lengths up to 24000 mm, while the Magnum series (100 MT to 2000 MT) adds greater throat depth for deep, complex bends. The Prudent series (25 MT to 160 MT) suits smaller precision fabricators, running on an ESA S630 controller from Italy.
All CNC series use servo hydraulics from HAWE Germany or ATOS Italy, self-centred hardened and ground segmented die and punch, and optional robotic arm integration and sheet follower attachments for fabricators automating high-volume production lines. Contact us to specify a CNC press brake for your Israel facility.
Hydraulic Press Brake Machine in Israel
Not every production line in Israel’s fabrication sector needs full CNC control. General fabricators producing enclosures, structural brackets, and construction components, particularly workshops with more varied, lower-volume job mixes, often get strong value from a robust conventional hydraulic press brake.
Energy Mission’s Hydraulic Press Brake covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed length. It uses a rear cylinder design with compact cylinders and a low-pressure hydraulic system, delivering better rigidity and fatigue resistance for continuous operation. Positive synchronisation through a welded torque tube keeps bend angles consistent along the full beam, with repeatability rated at plus or minus 0.05 mm.
The frame is built from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards, with a ram tilting arrangement that preserves bending accuracy as the machine accumulates operating hours over years of continuous use. Fast approach and return speed keeps cycle times productive, while a slower, controlled pressing stroke protects final bend accuracy.
Standard fittings include an unhardened multi-V die and semi gooseneck punch, front manual backgauge with micro-adjustment fingers, lead screws, double rod guides, and chain drive synchronisation. The machine supports on-site NC upgradation, letting fabricators in Israel start with the base hydraulic configuration and add a multistep DRO from DELTA, a motorised backgauge with DRO from HENGSTLER, Germany, or a high speed NC backgauge from Schneider with VFD as production needs grow.
This machine remains a dependable, cost-effective entry point for Israeli workshops running varied general fabrication work. Request a quote for the Hydraulic Press Brake.
NC Press Brake (Front Cylinder) in Israel
The front cylinder NC press brake gives Israeli fabricators digital backgauge positioning at a lower cost than full CNC, well suited to workshops producing repeat components for enclosures, brackets, and general industrial contracts where consistent positioning across a production run matters.
The NC Press Brake (Front Cylinder) is available from 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, with a frame of ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards. Repeatability is held to plus or minus 0.03 mm, and cylinders are positively synchronised through a welded torque tube. Fast approach and return speed, combined with a slower controlled pressing stroke, protects accuracy without slowing throughput.
Hydraulic cylinders use seamless honed tube construction with hardened, chrome plated piston rods and twin-type zero-leak PU seals, built for long service life under continuous production. The standard controller is an Estun E-21 for the X-axis, with the backgauge running on ball screw and guide rod.
Because this model supports on-site NC upgradation, fabricators can later add an ESTUN E200/300 controller, a Schneider controller, or a CYBELEC TOUCH 8P controller, plus hardened and ground segmented dies, quick release clamps, or Allen key type clamps, as order complexity and volume grow. Get a quote for the NC Press Brake (Front Cylinder).
NC Press Brake (Rear Cylinder) in Israel
For Israeli fabricators running mixed batch production, where job types change frequently but each still demands accurate, repeatable bending, the rear cylinder NC press brake delivers genuine two-axis digital control without the investment level of a full CNC system.
The NC Press Brake (Rear Cylinder) covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, running on a Cyb Touch 8P touchscreen two-axis controller from CYBELEC, Switzerland, with a 5.7 inch colour graphic LED backlit screen controlling both Y-axis bend angle and X-axis backgauge position. Operators can store up to 200 programs with up to 24 bends and individual backgauge positions each, useful for fabricators managing many different part profiles across automotive, agricultural, and general industrial contracts.
Backgauge position accuracy is 0.1 mm, with programmable backgauge retraction, angle correction, backgauge correction, open height per bend, and a job counter for production tracking. A 5-micron accuracy press brake scale on the Y-axis delivers repeatability of plus or minus 0.03 mm, and the high speed AC servo backgauge rides on hardened ball screw and LM guides with timer belt drive.
This machine handles fast changeover between sample production and mass production runs, well suited to Israeli fabricators supplying prototype and production batches for equipment manufacturers. Optional upgrades include a Force Control Module, DA-41T Delem NC controller, quick release clamps, and hardened and ground segmented dies. Request pricing for the NC Press Brake (Rear Cylinder).
Shearing Machines in Israel
Clean, accurate cutting is essential across Israel’s automotive, agricultural equipment, and construction fabrication sectors, where sheet metal parts often move directly into precision downstream processes. Energy Mission’s shearing machines combine a rigid box-type structure with four-edge interchangeable HcHCr hardened blades across hydraulic, CNC, and NC control options.
Hydraulic Shearing Machine in Israel
The Hydraulic Shearing Machine, from our HVR series, uses a hydraulically variable rake angle, giving fabricators in Israel the flexibility to cut thinner sheet at a lower rake angle for twist-free edges, or switch to a higher rake angle for cutting capacity beyond the machine’s standard rating on heavier plate.
The ram and table use a rigid box-type structure with an inclined member set in the direction of resultant cutting force, reducing deflection under continuous use. Blades are four-edge interchangeable HcHCr hardened and ground steel, suitable for mild steel and stainless steel, with pre-calibrated automatic blade gap adjustment for burr-free cuts. The ram is guided by six hardened ground guide rollers for consistent quality across the full table width, and the holding cylinder uses a sandwich bolted square box design that simplifies maintenance.
Electrical panels use Siemens, Schneider, or BCH components with hydraulic and electrical safety interlocks against overloading. Optional upgrades include a single step motorised backgauge with DRO from HENGSTLER, Germany, a multi-step motorised backgauge with touchscreen DRO from DELTA, Taiwan, a high speed NC backgauge with VFD from Schneider, and a ball transfer table for faster sheet handling. Enquire about the Hydraulic Shearing Machine.
CNC Shearing Machine in Israel
Fabricators processing standardised plate and sheet volumes for automotive, agricultural equipment, or construction component manufacturing benefit most from the CNC Shearing Machine, which automates backgauge positioning and cutting sequences for consistent output across long production runs.
It uses the same hydraulically variable rake angle blade system as the HVR series, with a servo-driven backgauge capable of positioning speeds up to 500 mm per second and repeatability of plus or minus 0.1 mm. The CNC touchscreen controller stores hundreds of cutting programs, letting operators recall a job instantly rather than resetting the backgauge manually, saving time for fabricators running multiple part numbers through the same line. Automatic blade gap compensation adjusts by material thickness, and multi-step programmable backgauge sequences allow a single sheet to be cut into multiple widths in one pass. An optional ball transfer table speeds up loading of heavier plate.
This machine suits Israeli fabricators supplying standardised components at volume, where consistency and cycle time directly affect production cost. Get a quote for the CNC Shearing Machine.
NC Shearing Machine in Israel
The NC Shearing Machine gives Israeli fabricators digital backgauge accuracy without the full programmability of a CNC system, a practical fit for workshops running a defined range of standard cutting patterns. It runs on an NC backgauge with DRO, offered as a HENGSTLER, Germany single step unit or a DELTA, Taiwan multi-step unit, with positioning accuracy of plus or minus 0.1 mm and up to 25 stored step positions in the multi-step configuration.
The machine retains the variable rake angle for cutting flexibility across material types and grades, with the same four-edge interchangeable HcHCr blades used across the shearing range. Because it is NC upgradable from the hydraulic base machine, fabricators in Israel can start with a standard hydraulic shear and add digital positioning as contract volumes grow, protecting their initial capital investment. Request pricing for the NC Shearing Machine.
Plate Rolling Machines in Israel
Storage tanks, structural cylinders, and equipment housings across Israel’s industrial and agricultural equipment sectors depend on accurately rolled plate. Energy Mission’s 3-roll and 4-roll plate rolling machines, built with alloy steel rolls and independent hydraulic roll control, deliver the consistent curvature and tolerance Israeli manufacturers require for both structural and precision equipment applications.
3 Roll DP Series Machine in Israel
The 3 Roll DP Series is a pyramid-type plate rolling machine handling 6 mm to 80 mm plate thickness across working widths of 1500 mm to 4000 mm, well suited to the tank, cylinder, and structural fabrication work common across Israel’s industrial sector. The top roll stays fixed while both bottom rolls move independently through separate hydraulic cylinders, and both bottom rolls are power-driven through a planetary gearbox with hydraulic motor for consistent torque.
A double pre-pinching arrangement reduces the flat, unrolled section left at each plate end, cutting rework and material waste. The built-in cone bending attachment adds versatility for tapered sections, and the hydraulic dropper end simplifies removal of finished cylinders. Overload protection and digital readout on both bottom roll positions give operators repeatable, trackable results, and a manual centralised lubrication system keeps upkeep manageable.
Standard equipment includes an extended shaft for profile bending and digital readout, with optional hardened and ground rolls, automatic lubrication, a material feed table, NC controls, side and top support for large diameter work, top roll drive, and interchangeable top rolls. Enquire about the 3 Roll DP Series.
3 Roll HM Series Machine in Israel
The 3 Roll HM Series uses a hydraulic initial pinch design with minimum flat end pre-bending, valuable for Israeli fabricators producing pressure vessels and precision tanks where a tight, uniform curve from end to end is essential for weld quality and dimensional accuracy. Hydraulic top roll side movement enables conical rolling, and each roll position is controlled independently through hydraulics for precise mid-job adjustment.
Both drive rolls are powered for uniform torque distribution, reducing plate slippage during rolling, and rolls are made from high-tensile alloy steel, precision ground for consistent surface contact. The hydraulic dropper end simplifies part removal, and NC position control with digital display comes standard, with a full CNC upgrade available for fabricators scaling toward tighter tolerance, higher precision production. Get a quote for the 3 Roll HM Series.
4 RL DP Series Machine in Israel
The 4 RL DP Series uses a four-roll design, a fixed top roll, a pinch roll, and two independent side bending rolls, enabling single-pass pre-bending of both plate ends without reversing the sheet. For Israeli fabricators running production against tight delivery schedules, this significantly reduces handling time compared to a 3-roll machine.
Position control across all four rolls can be specified as CNC or NC, with digital position readout for repeatable settings between jobs. Each side roll is controlled independently through hydraulics, and both the top roll and pinch roll are driven, delivering the torque needed for heavier plate without slippage. Rolls are manufactured from high-tensile forged alloy steel, hardened and precision ground. A hydraulic dropper end simplifies removal of the finished cylinder, and CNC side roll position control supports accurate conical rolling for tapered sections.
This is the machine we recommend for high-volume Israeli tank and cylinder fabricators who need to maximise throughput without sacrificing plate-end accuracy. Request pricing for the 4 RL DP Series.
Frequently Asked Questions
1. Does Energy Mission export press brake, shearing, and plate rolling machines directly to Israel?
2. Can Energy Mission machines meet the tight repeatability tolerances required by Israel's automotive and equipment manufacturing sector?
3. What documentation does Energy Mission provide to support import and technical approval processes in Israel?
4. Can machines be configured for automated or high-volume production lines?
5. What is the typical lead time for machinery ordered for delivery to Israel?
Contact Energy Mission for Metalworking Equipment in Israel
From automotive and agricultural equipment component supply to construction and general industrial fabrication, Energy Mission supplies the press brake, shearing, and plate rolling machines Israeli manufacturers rely on for precise, repeatable production. Contact us here to discuss your requirements and receive a detailed quote with shipping timelines.