Press Brake Machines and Metalworking Equipment Supplier
in Jordan
Jordan’s industrial base centres on Amman’s manufacturing zones and the Aqaba Special Economic Zone, with steady demand for fabrication equipment coming from the potash and phosphate mining sector, general construction, and Aqaba’s role as a logistics and re-export gateway toward Iraq and the wider region. Energy Mission Machineries supplies press brake machines, shearing machines, and plate rolling machines to fabricators across Jordan producing mining equipment components, storage tanks, structural steel, and general industrial parts.
Our NC and hydraulic ranges suit Jordan’s mid-size fabrication workshops well, while our CNC series serves larger contractors supplying mining and infrastructure projects who need higher precision and repeat-part accuracy.
Press Brake Machines in Jordan
Jordan’s fabrication sector spans structural steel for Amman’s construction market to heavy equipment components for the potash and phosphate mining operations near the Dead Sea and Aqaba. Energy Mission’s press brake range covers CNC, NC, and hydraulic control, with frames machined on a Floor Boring Machine and mounted on a 12-point roller bearing upper beam, giving fabricators in Jordan the durability needed for both general fabrication and heavier mining equipment work.
CNC Press Brake Machine in Jordan
Fabricators supplying Jordan’s mining, construction, and logistics sectors benefit from press brakes that combine accuracy with the flexibility to handle varied job types, since many Jordanian workshops serve multiple industries rather than a single specialised sector. Energy Mission’s CNC press brake range spans six series suited to different production scales.
The Optima series runs 25 MT to 325 MT across 1250 mm to 8000 mm bed length, with servo motor plus hydraulic pump drive on the Y1 and Y2 axis cutting power consumption by 45 to 50 percent, and beam speed up to 220 mm per second approach, 16 mm per second pressing. It runs on the CybTouch 8PS controller from CYBELEC, Switzerland.
The Splendid series (30 MT to 400 MT) delivers 40 to 45 percent energy savings with the same control platform, and the Efficient series scales up to 2000 MT for heavier plate work, useful for mining equipment and structural fabrication, with a frame built from ultrasonically and tensile tested IS:2062 grade steel.
For long structural members used in infrastructure projects, the Tandem/Tridem series synchronises two or more press brakes under one controller for lengths up to 24000 mm, while the Magnum series (100 MT to 2000 MT) adds greater throat depth for deep or complex bends. The Prudent series (25 MT to 160 MT) suits smaller Jordanian fabricators serving local construction and general industrial demand, running on an ESA S630 controller from Italy.
All CNC series use servo hydraulics from HAWE Germany or ATOS Italy, self-centred hardened and ground segmented die and punch, and a high speed AC servo backgauge. Contact us to specify a CNC press brake for your Jordan facility.
Hydraulic Press Brake Machine in Jordan
Many fabricators across Jordan, particularly workshops serving Amman’s construction sector or smaller contractors supplying general industrial and mining support equipment, get strong value from a robust conventional hydraulic press brake rather than a fully automated CNC system.
Energy Mission’s Hydraulic Press Brake covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed length. It uses a rear cylinder design with compact cylinders and a low-pressure hydraulic system, delivering better rigidity and fatigue resistance for continuous operation. Positive synchronisation through a welded torque tube keeps bend angles consistent along the full beam, with repeatability rated at plus or minus 0.05 mm.
The frame is built from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards, with a ram tilting arrangement that preserves bending accuracy as the machine accumulates operating hours over years of use. Fast approach and return speed keeps cycle times productive, while a slower, controlled pressing stroke protects final bend accuracy.
Standard fittings include an unhardened multi-V die and semi gooseneck punch, front manual backgauge with micro-adjustment fingers, lead screws, double rod guides, and chain drive synchronisation. The machine supports on-site NC upgradation, letting fabricators in Jordan start with the base hydraulic configuration and add a multistep DRO from DELTA, a motorised backgauge with DRO from HENGSTLER, Germany, or a high speed NC backgauge from Schneider with VFD as production needs grow.
This remains our most recommended entry point for Jordanian fabricators prioritising durability and manageable maintenance costs. Request a quote for the Hydraulic Press Brake.
NC Press Brake (Front Cylinder) in Jordan
The front cylinder NC press brake gives Jordanian fabricators digital backgauge positioning at a lower cost than full CNC, well suited to workshops producing repeat components for mining equipment support structures, structural brackets, and general fabrication contracts where consistent positioning matters.
The NC Press Brake (Front Cylinder) is available from 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, with a frame of ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards. Repeatability is held to plus or minus 0.03 mm, and cylinders are positively synchronised through a welded torque tube. Fast approach and return speed, combined with a slower controlled pressing stroke, protects accuracy without slowing production.
Hydraulic cylinders use seamless honed tube construction with hardened, chrome plated piston rods and twin-type zero-leak PU seals, built to handle the heat and dust conditions common across Jordan’s industrial areas. The standard controller is an Estun E-21 for the X-axis, with the backgauge running on ball screw and guide rod.
Because this model supports on-site NC upgradation, fabricators can later add an ESTUN E200/300 controller, a Schneider controller, or a CYBELEC TOUCH 8P controller, plus hardened and ground segmented dies, quick release clamps, or Allen key type clamps, as order volumes and project complexity grow. Get a quote for the NC Press Brake (Front Cylinder).
NC Press Brake (Rear Cylinder) in Jordan
For Jordanian fabricators running mixed production, serving both mining sector contracts and general construction work, the rear cylinder NC press brake delivers genuine two-axis digital control without the investment level of a full CNC system.
The NC Press Brake (Rear Cylinder) covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, running on a Cyb Touch 8P touchscreen two-axis controller from CYBELEC, Switzerland, with a 5.7 inch colour graphic LED backlit screen controlling both Y-axis bend angle and X-axis backgauge position. Operators can store up to 200 programs with up to 24 bends and individual backgauge positions each, useful for fabricators managing varied part profiles across different client contracts.
Backgauge position accuracy is 0.1 mm, with programmable backgauge retraction, angle correction, backgauge correction, open height per bend, and a job counter for production tracking. A 5-micron accuracy press brake scale on the Y-axis delivers repeatability of plus or minus 0.03 mm, and the high speed AC servo backgauge rides on hardened ball screw and LM guides with timer belt drive.
This machine handles fast changeover between sample production and mass production runs, useful for Jordanian fabricators serving both custom mining equipment orders and standardised structural contracts. Optional upgrades include a Force Control Module, DA-41T Delem NC controller, quick release clamps, and hardened and ground segmented dies. Request pricing for the NC Press Brake (Rear Cylinder).
Shearing Machines in Jordan
Reliable cutting capacity underpins production across Jordan’s mining equipment, construction, and general fabrication sectors, particularly for workshops in Amman and Aqaba processing plate for both local projects and re-export orders. Energy Mission’s shearing machines combine a rigid box-type structure with four-edge interchangeable HcHCr hardened blades across hydraulic, CNC, and NC control options.
Hydraulic Shearing Machine in Jordan
The Hydraulic Shearing Machine, from our HVR series, uses a hydraulically variable rake angle, giving fabricators in Jordan the flexibility to cut thinner sheet at a lower rake angle for twist-free edges, or switch to a higher rake angle for cutting capacity beyond the machine’s standard rating on structural plate.
The ram and table use a rigid box-type structure with an inclined member set in the direction of resultant cutting force, reducing deflection under continuous use. Blades are four-edge interchangeable HcHCr hardened and ground steel, suitable for mild steel and stainless steel, with pre-calibrated automatic blade gap adjustment for burr-free cuts. The ram is guided by six hardened ground guide rollers for consistent quality across the full table width, and the holding cylinder uses a sandwich bolted square box design that simplifies maintenance.
Electrical panels use Siemens, Schneider, or BCH components with hydraulic and electrical safety interlocks against overloading. Optional upgrades include a single step motorised backgauge with DRO from HENGSTLER, Germany, a multi-step motorised backgauge with touchscreen DRO from DELTA, Taiwan, a high speed NC backgauge with VFD from Schneider, and a ball transfer table for faster sheet handling. Enquire about the Hydraulic Shearing Machine.
CNC Shearing Machine in Jordan
Fabricators processing standardised plate volumes for mining equipment or structural steel contracts benefit most from the CNC Shearing Machine, which automates backgauge positioning and cutting sequences for consistent output across long production runs.
It uses the same hydraulically variable rake angle blade system as the HVR series, with a servo-driven backgauge capable of positioning speeds up to 500 mm per second and repeatability of plus or minus 0.1 mm. The CNC touchscreen controller stores hundreds of cutting programs, letting operators recall a job instantly, saving time for fabricators handling multiple concurrent contracts across Amman and Aqaba. Automatic blade gap compensation adjusts by material thickness, and multi-step programmable backgauge sequences allow a single sheet to be cut into multiple widths in one pass. An optional ball transfer table speeds up loading of heavier plate.
This machine suits Jordanian fabricators scaling toward high-volume, standardised production for mining and infrastructure clients. Get a quote for the CNC Shearing Machine.
NC Shearing Machine in Jordan
The NC Shearing Machine gives Jordanian fabricators digital backgauge accuracy without the full programmability of a CNC system, a practical fit for workshops running a defined set of standard cutting patterns. It runs on an NC backgauge with DRO, offered as a HENGSTLER, Germany single step unit or a DELTA, Taiwan multi-step unit, with positioning accuracy of plus or minus 0.1 mm and up to 25 stored step positions in the multi-step configuration.
The machine retains the variable rake angle for cutting flexibility across material types and grades, with the same four-edge interchangeable HcHCr blades used across the shearing range. Because it is NC upgradable from the hydraulic base machine, fabricators in Jordan can start with a standard hydraulic shear and add digital positioning as contract volumes grow, protecting their initial capital investment. Request pricing for the NC Shearing Machine.
Plate Rolling Machines in Jordan
Storage tanks, mining equipment cylinders, and pipeline sections make up a steady share of Jordan’s heavier fabrication work, much of it tied to the potash and phosphate industry and Aqaba’s logistics infrastructure. Energy Mission’s 3-roll and 4-roll plate rolling machines, built with alloy steel rolls and independent hydraulic roll control, are sized to serve both mining equipment fabrication and general industrial rolling work.
3 Roll DP Series Machine in Jordan
The 3 Roll DP Series is a pyramid-type plate rolling machine handling 6 mm to 80 mm plate thickness across working widths of 1500 mm to 4000 mm, well matched to the tank, pipe, and mining equipment fabrication work common across Jordan’s industrial sector. The top roll stays fixed while both bottom rolls move independently through separate hydraulic cylinders, and both bottom rolls are power-driven through a planetary gearbox with hydraulic motor for consistent torque.
A double pre-pinching arrangement reduces the flat, unrolled section left at each plate end, cutting rework on production runs. The built-in cone bending attachment adds versatility for tapered sections used in pipe and equipment work, and the hydraulic dropper end simplifies removal of finished cylinders. Overload protection and digital readout on both bottom roll positions give operators repeatable, trackable results, and a manual centralised lubrication system keeps upkeep manageable.
Standard equipment includes an extended shaft for profile bending and digital readout, with optional hardened and ground rolls, automatic lubrication, a material feed table, NC controls, side and top support for large diameter work, top roll drive, and interchangeable top rolls. Enquire about the 3 Roll DP Series.
3 Roll HM Series Machine in Jordan
The 3 Roll HM Series uses a hydraulic initial pinch design with minimum flat end pre-bending, valuable for Jordanian fabricators producing pressure vessels and tanks for mining and industrial infrastructure, where a tight, uniform curve from end to end is essential for weld quality. Hydraulic top roll side movement enables conical rolling, and each roll position is controlled independently through hydraulics for precise mid-job adjustment.
Both drive rolls are powered for uniform torque distribution, reducing plate slippage during rolling, and rolls are made from high-tensile alloy steel, precision ground for consistent surface contact. The hydraulic dropper end simplifies part removal, and NC position control with digital display comes standard, with a full CNC upgrade available for fabricators scaling toward tighter tolerance production. Get a quote for the 3 Roll HM Series.
4 RL DP Series Machine in Jordan
The 4 RL DP Series uses a four-roll design, a fixed top roll, a pinch roll, and two independent side bending rolls, enabling single-pass pre-bending of both plate ends without reversing the sheet. For Jordanian fabricators running production against tight mining and infrastructure project schedules, this significantly reduces handling time compared to a 3-roll machine.
Position control across all four rolls can be specified as CNC or NC, with digital position readout for repeatable settings between jobs. Each side roll is controlled independently through hydraulics, and both the top roll and pinch roll are driven, delivering the torque needed for heavier plate without slippage. Rolls are manufactured from high-tensile forged alloy steel, hardened and precision ground. A hydraulic dropper end simplifies removal of the finished cylinder, and CNC side roll position control supports accurate conical rolling for tapered pipeline sections.
This is the machine we recommend for high-volume Jordanian tank and pipe fabricators who need to maximise throughput without sacrificing plate-end accuracy. Request pricing for the 4 RL DP Series.
Frequently Asked Questions
1. Does Energy Mission ship machinery directly to Jordan, including through the Aqaba Special Economic Zone?
2. Which machines are best suited to fabricators supplying Jordan's potash and phosphate mining sector?
3. Can Jordanian fabricators use Energy Mission machinery for re-export or supply into neighbouring markets through Aqaba?
4. What support does Energy Mission provide for spare parts and servicing in Jordan?
5. What is the typical lead time for machinery ordered for delivery to Jordan?
Contact Energy Mission for Metalworking Equipment in Jordan
From mining equipment fabrication near the Dead Sea to logistics and construction work across Amman and Aqaba, Energy Mission supplies the press brake, shearing, and plate rolling machines Jordan’s fabrication sector depends on. Contact us here to discuss your requirements and receive a detailed quote with shipping timelines.