Press Brake Machines and Metalworking Equipment Supplier
in Bahrain
Bahrain’s manufacturing sector is anchored by Aluminium Bahrain, one of the largest aluminium smelters in the world, which has built up a strong downstream fabrication industry producing extrusions, panels, and finished aluminium and steel components, alongside general construction and marine fabrication work supported by Khalifa Bin Salman Port.
Energy Mission Machineries supplies press brake machines, shearing machines, and plate rolling machines to fabricators across Bahrain producing architectural panels, structural components, and precision sheet metal parts for both domestic use and regional export.
Our CNC-controlled machines, built with CYBELEC Switzerland controllers and servo hydraulics from HAWE Germany and ATOS Italy, suit the tight tolerance, high-value fabrication work common in Bahrain’s compact but sophisticated manufacturing base.
Press Brake Machines in Bahrain
Bahrain’s fabrication sector, built around downstream aluminium processing and precision sheet metal work, generally values accuracy and finish quality over sheer tonnage. Energy Mission’s press brake range covers CNC, NC, and hydraulic control, with frames machined on a Floor Boring Machine and mounted on a 12-point roller bearing upper beam, giving fabricators in Bahrain the consistent bend accuracy needed for architectural panels and precision component work.
CNC Press Brake Machine in Bahrain
Fabricators supplying Bahrain’s downstream aluminium and precision sheet metal sectors need press brakes that deliver tight, repeatable bend accuracy without marking or distorting high-value material. Energy Mission’s CNC press brake range spans six series to match different production scales.
The Optima series runs 25 MT to 325 MT across 1250 mm to 8000 mm bed length, with servo motor plus hydraulic pump drive on the Y1 and Y2 axis cutting power consumption by 45 to 50 percent, and beam speed up to 220 mm per second approach, 16 mm per second pressing for controlled, precise bending. It runs on the CybTouch 8PS controller from CYBELEC, Switzerland.
The Splendid series (30 MT to 400 MT) delivers 40 to 45 percent energy savings with the same control platform, and the Efficient series scales up to 2000 MT for heavier plate work, with a frame built from ultrasonically and tensile tested IS:2062 grade steel.
For longer structural members used in construction and infrastructure work, the Tandem/Tridem series synchronises two or more press brakes under one controller for lengths up to 24000 mm, while the Magnum series (100 MT to 2000 MT) adds greater throat depth for deep, complex bends. The Prudent series (25 MT to 160 MT) suits Bahrain’s smaller precision fabricators, running on an ESA S630 controller from Italy.
All CNC series use servo hydraulics from HAWE Germany or ATOS Italy, self-centred hardened and ground segmented die and punch, and optional double side punch clamp and automatic angle measurement, both useful for fabricators working with softer aluminium alloys that need extra care against surface marking. Contact us to specify a CNC press brake for your Bahrain facility.
Hydraulic Press Brake Machine in Bahrain
Not every fabrication job in Bahrain requires full CNC automation. General fabricators producing structural components, marine fittings, and mid-volume architectural parts often get strong value from a robust conventional hydraulic press brake.
Energy Mission’s Hydraulic Press Brake covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed length. It uses a rear cylinder design with compact cylinders and a low-pressure hydraulic system, delivering better rigidity and fatigue resistance for continuous operation. Positive synchronisation through a welded torque tube keeps bend angles consistent along the full beam, with repeatability rated at plus or minus 0.05 mm.
The frame is built from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards, with a ram tilting arrangement that preserves bending accuracy as the machine accumulates operating hours over years of use. Fast approach and return speed keeps cycle times productive, while a slower, controlled pressing stroke protects final bend accuracy.
Standard fittings include an unhardened multi-V die and semi gooseneck punch, front manual backgauge with micro-adjustment fingers, lead screws, double rod guides, and chain drive synchronisation. The machine supports on-site NC upgradation, letting fabricators in Bahrain start with the base hydraulic configuration and add a multistep DRO from DELTA, a motorised backgauge with DRO from HENGSTLER, Germany, or a high speed NC backgauge from Schneider with VFD as production needs grow.
This machine remains a dependable, cost-effective choice for Bahraini fabricators running varied general fabrication work alongside precision aluminium contracts. Request a quote for the Hydraulic Press Brake.
NC Press Brake (Front Cylinder) in Bahrain
The front cylinder NC press brake gives Bahraini fabricators digital backgauge positioning at a lower cost than full CNC, well suited to workshops producing repeat components for architectural panels, brackets, and general fabrication contracts where consistent positioning matters.
The NC Press Brake (Front Cylinder) is available from 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, with a frame of ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards. Repeatability is held to plus or minus 0.03 mm, and cylinders are positively synchronised through a welded torque tube. Fast approach and return speed, combined with a slower controlled pressing stroke, protects accuracy without slowing throughput.
Hydraulic cylinders use seamless honed tube construction with hardened, chrome plated piston rods and twin-type zero-leak PU seals, built for long service life in Bahrain’s humid coastal conditions. The standard controller is an Estun E-21 for the X-axis, with the backgauge running on ball screw and guide rod.
Because this model supports on-site NC upgradation, fabricators can later add an ESTUN E200/300 controller, a Schneider controller, or a CYBELEC TOUCH 8P controller, plus hardened and ground segmented dies, quick release clamps, or Allen key type clamps, as order volumes grow. Get a quote for the NC Press Brake (Front Cylinder).
NC Press Brake (Rear Cylinder) in Bahrain
For Bahraini fabricators running mixed production, serving both aluminium downstream contracts and general steel fabrication work, the rear cylinder NC press brake delivers genuine two-axis digital control without the investment level of a full CNC system.
The NC Press Brake (Rear Cylinder) covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, running on a Cyb Touch 8P touchscreen two-axis controller from CYBELEC, Switzerland, with a 5.7 inch colour graphic LED backlit screen controlling both Y-axis bend angle and X-axis backgauge position. Operators can store up to 200 programs with up to 24 bends and individual backgauge positions each, useful for fabricators managing varied architectural and structural part profiles.
Backgauge position accuracy is 0.1 mm, with programmable backgauge retraction, angle correction, backgauge correction, open height per bend, and a job counter for production tracking. A 5-micron accuracy press brake scale on the Y-axis delivers repeatability of plus or minus 0.03 mm, and the high speed AC servo backgauge rides on hardened ball screw and LM guides with timer belt drive.
This machine handles fast changeover between sample production and mass production runs, well suited to Bahraini fabricators serving both custom architectural work and standardised production contracts. Optional upgrades include a Force Control Module, DA-41T Delem NC controller, quick release clamps, and hardened and ground segmented dies. Request pricing for the NC Press Brake (Rear Cylinder).
Shearing Machines in Bahrain
Clean, precise cutting is essential across Bahrain’s aluminium downstream and general fabrication sectors, where sheet often moves directly into architectural or precision assembly work with little tolerance for burrs or edge damage. Energy Mission’s shearing machines combine a rigid box-type structure with four-edge interchangeable HcHCr hardened blades across hydraulic, CNC, and NC control options.
Hydraulic Shearing Machine in Bahrain
The Hydraulic Shearing Machine, from our HVR series, uses a hydraulically variable rake angle, giving fabricators in Bahrain the flexibility to cut thinner architectural sheet at a lower rake angle for twist-free edges, or switch to a higher rake angle for cutting capacity beyond the machine’s standard rating on structural plate.
The ram and table use a rigid box-type structure with an inclined member set in the direction of resultant cutting force, reducing deflection under continuous use. Blades are four-edge interchangeable HcHCr hardened and ground steel, suitable for mild steel and stainless steel, with pre-calibrated automatic blade gap adjustment for burr-free cuts, an important detail for fabricators cutting finish-grade material for architectural applications. The ram is guided by six hardened ground guide rollers for consistent quality across the full table width, and the holding cylinder uses a sandwich bolted square box design that simplifies maintenance.
Electrical panels use Siemens, Schneider, or BCH components with hydraulic and electrical safety interlocks against overloading. Optional upgrades include a single step motorised backgauge with DRO from HENGSTLER, Germany, a multi-step motorised backgauge with touchscreen DRO from DELTA, Taiwan, a high speed NC backgauge with VFD from Schneider, and a ball transfer table for faster sheet handling. Enquire about the Hydraulic Shearing Machine.
CNC Shearing Machine in Bahrain
Fabricators processing standardised plate and sheet volumes for architectural panel or structural component manufacturing benefit most from the CNC Shearing Machine, which automates backgauge positioning and cutting sequences for consistent output across long production runs.
It uses the same hydraulically variable rake angle blade system as the HVR series, with a servo-driven backgauge capable of positioning speeds up to 500 mm per second and repeatability of plus or minus 0.1 mm. The CNC touchscreen controller stores hundreds of cutting programs, letting operators recall a job instantly rather than resetting the backgauge manually, saving time for fabricators running multiple panel or part sizes through the same line. Automatic blade gap compensation adjusts by material thickness, and multi-step programmable backgauge sequences allow a single sheet to be cut into multiple widths in one pass. An optional ball transfer table speeds up loading of heavier plate.
This machine suits Bahraini fabricators supplying standardised architectural or structural components at volume, where cut consistency directly affects finish quality. Get a quote for the CNC Shearing Machine.
NC Shearing Machine in Bahrain
The NC Shearing Machine gives Bahraini fabricators digital backgauge accuracy without the full programmability of a CNC system, a practical fit for workshops running a defined range of standard cutting patterns. It runs on an NC backgauge with DRO, offered as a HENGSTLER, Germany single step unit or a DELTA, Taiwan multi-step unit, with positioning accuracy of plus or minus 0.1 mm and up to 25 stored step positions in the multi-step configuration.
The machine retains the variable rake angle for cutting flexibility across material types and grades, with the same four-edge interchangeable HcHCr blades used across the shearing range. Because it is NC upgradable from the hydraulic base machine, fabricators in Bahrain can start with a standard hydraulic shear and add digital positioning as contract volumes grow, protecting their initial capital investment. Request pricing for the NC Shearing Machine.
Plate Rolling Machines in Bahrain
Structural cylinders, storage tanks, and marine fabrication components make up a steady share of Bahrain’s heavier fabrication work, supported by activity around Khalifa Bin Salman Port and the wider industrial zone. Energy Mission’s 3-roll and 4-roll plate rolling machines, built with alloy steel rolls and independent hydraulic roll control, are sized to serve both structural and precision rolling work.
3 Roll DP Series Machine in Bahrain
The 3 Roll DP Series is a pyramid-type plate rolling machine handling 6 mm to 80 mm plate thickness across working widths of 1500 mm to 4000 mm, well matched to the tank, cylinder, and structural fabrication work common across Bahrain’s industrial sector. The top roll stays fixed while both bottom rolls move independently through separate hydraulic cylinders, and both bottom rolls are power-driven through a planetary gearbox with hydraulic motor for consistent torque.
A double pre-pinching arrangement reduces the flat, unrolled section left at each plate end, cutting rework on production runs. The built-in cone bending attachment adds versatility for tapered sections used in marine and pipe work, and the hydraulic dropper end simplifies removal of finished cylinders. Overload protection and digital readout on both bottom roll positions give operators repeatable, trackable results, and a manual centralised lubrication system keeps upkeep manageable.
Standard equipment includes an extended shaft for profile bending and digital readout, with optional hardened and ground rolls, automatic lubrication, a material feed table, NC controls, side and top support for large diameter work, top roll drive, and interchangeable top rolls. Enquire about the 3 Roll DP Series.
3 Roll HM Series Machine in Bahrain
The 3 Roll HM Series uses a hydraulic initial pinch design with minimum flat end pre-bending, valuable for Bahraini fabricators producing pressure vessels and precision tanks where a tight, uniform curve from end to end is essential for weld quality and dimensional accuracy. Hydraulic top roll side movement enables conical rolling, and each roll position is controlled independently through hydraulics for precise mid-job adjustment.
Both drive rolls are powered for uniform torque distribution, reducing plate slippage during rolling, and rolls are made from high-tensile alloy steel, precision ground for consistent surface contact, a useful quality for fabricators working with premium finish requirements. The hydraulic dropper end simplifies part removal, and NC position control with digital display comes standard, with a full CNC upgrade available for fabricators scaling toward tighter tolerance production. Get a quote for the 3 Roll HM Series.
4 RL DP Series Machine in Bahrain
The 4 RL DP Series uses a four-roll design, a fixed top roll, a pinch roll, and two independent side bending rolls, enabling single-pass pre-bending of both plate ends without reversing the sheet. For Bahraini fabricators running production against tight delivery schedules, this significantly reduces handling time compared to a 3-roll machine.
Position control across all four rolls can be specified as CNC or NC, with digital position readout for repeatable settings between jobs. Each side roll is controlled independently through hydraulics, and both the top roll and pinch roll are driven, delivering the torque needed for heavier plate without slippage. Rolls are manufactured from high-tensile forged alloy steel, hardened and precision ground. A hydraulic dropper end simplifies removal of the finished cylinder, and CNC side roll position control supports accurate conical rolling for tapered sections used in marine fabrication.
This is the machine we recommend for high-volume Bahraini tank and cylinder fabricators who need to maximise throughput without sacrificing plate-end accuracy. Request pricing for the 4 RL DP Series.
Frequently Asked Questions
1. Does Energy Mission export press brake, shearing, and plate rolling machines directly to Bahrain?
2. Are Energy Mission machines suitable for fabricating aluminium components downstream of Bahrain's smelting industry?
3. What machines are best suited to precision architectural panel fabrication in Bahrain?
4. Can Energy Mission provide documentation to support technical approval and import processes in Bahrain?
5. What is the typical lead time for machinery ordered for delivery to Bahrain?
Contact Energy Mission for Metalworking Equipment in Bahrain
From downstream aluminium fabrication to marine and architectural metalwork supported by Khalifa Bin Salman Port, Energy Mission supplies the press brake, shearing, and plate rolling machines Bahrain’s precision fabrication sector relies on. Contact us here to discuss your requirements and receive a detailed quote with shipping timelines.