Press Brake Machines and Metalworking Equipment Supplier
in Iraq
Iraq’s fabrication sector is rebuilding on multiple fronts, from oil infrastructure work around Basra to construction and utility projects in Baghdad and the steady industrial growth seen in Erbil and the Kurdistan region. Energy Mission Machineries supplies press brake machines, shearing machines, and plate rolling machines to fabricators and contractors across Iraq producing pipeline components, storage tanks, structural steel, and general infrastructure parts.
Our equipment is built for rugged, dependable operation, with hydraulic and NC ranges suited to workshops that need durable machines requiring minimal specialist servicing, alongside our full CNC range for larger contractors supplying oil sector and reconstruction projects that demand high-volume, repeatable output.
Press Brake Machines in Iraq
Iraq’s reconstruction and oil infrastructure sectors both depend on press brakes that combine dependable output with accuracy across long production runs, whether bending pipeline supports, storage tank components, or structural steel for utility and building projects. Energy Mission’s press brake range covers CNC, NC, and hydraulic control, with frames machined on a Floor Boring Machine and mounted on a 12-point roller bearing upper beam, built to hold accuracy through years of continuous production.
CNC Press Brake Machine in Iraq
Fabricators supplying Iraq’s oil infrastructure and reconstruction sectors need press brakes capable of consistent, high-volume bending for pipeline supports, tank components, and structural steel. Energy Mission’s CNC press brake range spans six series to match different production scales.
The Optima series runs 25 MT to 325 MT across 1250 mm to 8000 mm bed length, with servo motor plus hydraulic pump drive on the Y1 and Y2 axis cutting power consumption by 45 to 50 percent, a meaningful saving for contractors running generator-supplied power on remote infrastructure sites. It uses the CybTouch 8PS controller from CYBELEC, Switzerland.
The Splendid series (30 MT to 400 MT) delivers 40 to 45 percent energy savings with the same control platform, and the Efficient series scales up to 2000 MT for heavy plate work, well suited to pipeline and storage tank fabrication tied to Basra’s oil infrastructure, with a frame built from ultrasonically and tensile tested IS:2062 grade steel.
For long structural members used in reconstruction and infrastructure projects, the Tandem/Tridem series synchronises two or more press brakes under one controller for lengths up to 24000 mm, while the Magnum series (100 MT to 2000 MT) adds greater throat depth for deep, complex bends. The Prudent series (25 MT to 160 MT) suits smaller fabricators serving Baghdad and Erbil’s construction sectors, running on an ESA S630 controller from Italy.
All CNC series use servo hydraulics from HAWE Germany or ATOS Italy, self-centred hardened and ground segmented die and punch, and a high speed AC servo backgauge. Contact us to specify a CNC press brake for your Iraq facility.
Hydraulic Press Brake Machine in Iraq
For many fabricators across Iraq, particularly workshops supplying reconstruction and general infrastructure projects where power reliability and servicing access vary by region, a conventional hydraulic press brake remains the most practical, durable choice.
Energy Mission’s Hydraulic Press Brake covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed length. It uses a rear cylinder design with compact cylinders and a low-pressure hydraulic system, delivering better rigidity and fatigue resistance for machines expected to run continuously across demanding project schedules. Positive synchronisation through a welded torque tube keeps bend angles consistent along the full beam, with repeatability rated at plus or minus 0.05 mm.
The frame is built from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards, with a ram tilting arrangement that preserves bending accuracy as the machine accumulates operating hours over years of use, an important feature where replacing machinery mid-project is impractical. Fast approach and return speed keeps cycle times productive, while a slower, controlled pressing stroke protects final bend accuracy.
Standard fittings include an unhardened multi-V die and semi gooseneck punch, front manual backgauge with micro-adjustment fingers, lead screws, double rod guides, and chain drive synchronisation. The machine supports on-site NC upgradation, letting fabricators in Iraq start with the base hydraulic configuration and add a multistep DRO from DELTA, a motorised backgauge with DRO from HENGSTLER, Germany, or a high speed NC backgauge from Schneider with VFD as production needs and site conditions allow.
This is the machine we recommend most often for Iraqi contractors prioritising durability and straightforward maintenance on infrastructure and reconstruction projects. Request a quote for the Hydraulic Press Brake.
NC Press Brake (Front Cylinder) in Iraq
The front cylinder NC press brake gives Iraqi fabricators digital backgauge positioning at a lower cost than full CNC, well suited to contractors producing repeat components for pipeline supports, structural brackets, and utility infrastructure where consistent positioning across a production run saves setup time.
The NC Press Brake (Front Cylinder) is available from 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, with a frame of ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards. Repeatability is held to plus or minus 0.03 mm, and cylinders are positively synchronised through a welded torque tube. Fast approach and return speed, combined with a slower controlled pressing stroke, protects accuracy without slowing production.
Hydraulic cylinders use seamless honed tube construction with hardened, chrome plated piston rods and twin-type zero-leak PU seals, built to withstand heat and dust conditions common across Iraq’s construction and oilfield sites. The standard controller is an Estun E-21 for the X-axis, with the backgauge running on ball screw and guide rod.
Because this model supports on-site NC upgradation, fabricators can later add an ESTUN E200/300 controller, a Schneider controller, or a CYBELEC TOUCH 8P controller, plus hardened and ground segmented dies, quick release clamps, or Allen key type clamps, as project scope and available budget grow. Get a quote for the NC Press Brake (Front Cylinder).
NC Press Brake (Rear Cylinder) in Iraq
For Iraqi fabricators running mixed production, serving both oil sector infrastructure contracts and general reconstruction work, the rear cylinder NC press brake delivers genuine two-axis digital control without the investment level of a full CNC system.
The NC Press Brake (Rear Cylinder) covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, running on a Cyb Touch 8P touchscreen two-axis controller from CYBELEC, Switzerland, with a 5.7 inch colour graphic LED backlit screen controlling both Y-axis bend angle and X-axis backgauge position. Operators can store up to 200 programs with up to 24 bends and individual backgauge positions each, useful for contractors managing varied part profiles across different infrastructure contracts.
Backgauge position accuracy is 0.1 mm, with programmable backgauge retraction, angle correction, backgauge correction, open height per bend, and a job counter for production tracking. A 5-micron accuracy press brake scale on the Y-axis delivers repeatability of plus or minus 0.03 mm, and the high speed AC servo backgauge rides on hardened ball screw and LM guides with timer belt drive.
This machine handles fast changeover between sample production and mass production runs, useful for Iraqi fabricators serving both specialised oil infrastructure component orders and standardised reconstruction contracts. Optional upgrades include a Force Control Module, DA-41T Delem NC controller, quick release clamps, and hardened and ground segmented dies. Request pricing for the NC Press Brake (Rear Cylinder).
Shearing Machines in Iraq
Reliable cutting capacity is essential across Iraq’s oil infrastructure and reconstruction fabrication sectors, where plate needs to be processed accurately and consistently, often under demanding project timelines. Energy Mission’s shearing machines combine a rigid box-type structure with four-edge interchangeable HcHCr hardened blades across hydraulic, CNC, and NC control options.
Hydraulic Shearing Machine in Iraq
The Hydraulic Shearing Machine, from our HVR series, uses a hydraulically variable rake angle, giving fabricators in Iraq the flexibility to cut thinner sheet at a lower rake angle for twist-free edges, or switch to a higher rake angle for cutting capacity beyond the machine’s standard rating on heavier structural or pipeline plate.
The ram and table use a rigid box-type structure with an inclined member set in the direction of resultant cutting force, reducing deflection under continuous heavy use common on infrastructure fabrication sites. Blades are four-edge interchangeable HcHCr hardened and ground steel, suitable for mild steel and stainless steel, with pre-calibrated automatic blade gap adjustment for burr-free cuts. The ram is guided by six hardened ground guide rollers for consistent quality across the full table width, and the holding cylinder uses a sandwich bolted square box design that simplifies maintenance, valuable where spare parts and technician access can vary by region.
Electrical panels use Siemens, Schneider, or BCH components with hydraulic and electrical safety interlocks against overloading. Optional upgrades include a single step motorised backgauge with DRO from HENGSTLER, Germany, a multi-step motorised backgauge with touchscreen DRO from DELTA, Taiwan, a high speed NC backgauge with VFD from Schneider, and a ball transfer table for faster sheet handling. Enquire about the Hydraulic Shearing Machine.
CNC Shearing Machine in Iraq
Fabricators processing standardised plate volumes for pipeline, tank, or structural steel contracts benefit most from the CNC Shearing Machine, which automates backgauge positioning and cutting sequences for consistent output across long production runs.
It uses the same hydraulically variable rake angle blade system as the HVR series, with a servo-driven backgauge capable of positioning speeds up to 500 mm per second and repeatability of plus or minus 0.1 mm. The CNC touchscreen controller stores hundreds of cutting programs, letting operators recall a job instantly, saving time for contractors managing multiple concurrent infrastructure contracts. Automatic blade gap compensation adjusts by material thickness, and multi-step programmable backgauge sequences allow a single sheet to be cut into multiple widths in one pass. An optional ball transfer table speeds up loading of heavier plate.
This machine suits Iraqi fabricators scaling toward high-volume, standardised production for oil sector and reconstruction contracts. Get a quote for the CNC Shearing Machine.
NC Shearing Machine in Iraq
The NC Shearing Machine gives Iraqi fabricators digital backgauge accuracy without the full programmability of a CNC system, a practical fit for contractors running a defined range of standard cutting patterns for pipeline and structural work. It runs on an NC backgauge with DRO, offered as a HENGSTLER, Germany single step unit or a DELTA, Taiwan multi-step unit, with positioning accuracy of plus or minus 0.1 mm and up to 25 stored step positions in the multi-step configuration.
The machine retains the variable rake angle for cutting flexibility across material types and grades, with the same four-edge interchangeable HcHCr blades used across the shearing range. Because it is NC upgradable from the hydraulic base machine, Iraqi fabricators can start with a standard hydraulic shear and add digital positioning as contract volumes grow, protecting their initial capital investment. Request pricing for the NC Shearing Machine.
Plate Rolling Machines in Iraq
Pipeline sections and storage tanks form the backbone of fabrication demand tied to Iraq’s oil infrastructure sector, alongside structural cylinders needed for utility and reconstruction projects in Baghdad and the northern governorates. Energy Mission’s 3-roll and 4-roll plate rolling machines, built with alloy steel rolls and independent hydraulic roll control, are sized to serve this scale of fabrication work.
3 Roll DP Series Machine in Iraq
The 3 Roll DP Series is a pyramid-type plate rolling machine handling 6 mm to 80 mm plate thickness across working widths of 1500 mm to 4000 mm, well matched to the tank and pipeline fabrication work common across Iraq’s oil infrastructure sector. The top roll stays fixed while both bottom rolls move independently through separate hydraulic cylinders, and both bottom rolls are power-driven through a planetary gearbox with hydraulic motor for consistent torque.
A double pre-pinching arrangement reduces the flat, unrolled section left at each plate end, cutting rework on production runs. The built-in cone bending attachment adds versatility for tapered pipeline sections, and the hydraulic dropper end simplifies removal of finished cylinders. Overload protection and digital readout on both bottom roll positions give operators repeatable, trackable results, and a manual centralised lubrication system keeps upkeep manageable for contractors without a dedicated maintenance team on site.
Standard equipment includes an extended shaft for profile bending and digital readout, with optional hardened and ground rolls, automatic lubrication, a material feed table, NC controls, side and top support for large diameter work, top roll drive, and interchangeable top rolls. Enquire about the 3 Roll DP Series.
3 Roll HM Series Machine in Iraq
The 3 Roll HM Series uses a hydraulic initial pinch design with minimum flat end pre-bending, important for Iraqi fabricators producing pressure vessels and storage tanks for oil infrastructure, where a tight, uniform curve from end to end is essential for weld integrity. Hydraulic top roll side movement enables conical rolling, and each roll position is controlled independently through hydraulics for precise mid-job adjustment.
Both drive rolls are powered for uniform torque distribution, reducing plate slippage during rolling, and rolls are made from high-tensile alloy steel, precision ground for consistent surface contact. The hydraulic dropper end simplifies part removal, and NC position control with digital display comes standard, with a full CNC upgrade available for fabricators scaling toward tighter tolerance production for export-grade or higher-specification vessel work. Get a quote for the 3 Roll HM Series.
4 RL DP Series Machine in Iraq
The 4 RL DP Series uses a four-roll design, a fixed top roll, a pinch roll, and two independent side bending rolls, enabling single-pass pre-bending of both plate ends without reversing the sheet. For Iraqi fabricators running production against tight infrastructure and reconstruction project schedules, this significantly reduces handling time compared to a 3-roll machine.
Position control across all four rolls can be specified as CNC or NC, with digital position readout for repeatable settings between jobs. Each side roll is controlled independently through hydraulics, and both the top roll and pinch roll are driven, delivering the torque needed for heavier plate without slippage. Rolls are manufactured from high-tensile forged alloy steel, hardened and precision ground. A hydraulic dropper end simplifies removal of the finished cylinder, and CNC side roll position control supports accurate conical rolling for tapered pipeline sections.
This is the machine we recommend for high-volume Iraqi tank and pipeline fabricators who need to maximise throughput without sacrificing plate-end accuracy. Request pricing for the 4 RL DP Series.
Frequently Asked Questions
1. Does Energy Mission export press brake, shearing, and plate rolling machines directly to Iraq?
2. Which machines are best suited to pipeline and storage tank fabrication for Iraq's oil sector?
3. What happens if a machine needs service support given variable infrastructure conditions across different regions of Iraq?
4. Can Energy Mission machines run reliably on generator power common at remote infrastructure and construction sites in Iraq?
5. What is the typical lead time and shipping process for machinery ordered for delivery to Iraq?
Contact Energy Mission for Metalworking Equipment in Iraq
From oil infrastructure fabrication around Basra to reconstruction and utility projects in Baghdad and Erbil, Energy Mission supplies the press brake, shearing, and plate rolling machines Iraq’s fabrication sector depends on for durable, dependable production. Contact us here to discuss your requirements and receive a detailed quote with shipping timelines.