Press Brake Machines and Metalworking Equipment Supplier
in Lebanon
Lebanon’s metalworking sector is made up largely of small and mid-size workshops, many of them family-run, rebuilding capacity after years of economic strain and the damage caused by the 2020 Beirut port explosion, which affected fabrication businesses across the surrounding industrial districts. Energy Mission Machineries supplies press brake machines, shearing machines, and plate rolling machines built to give Lebanese fabricators reliable, cost-effective production equipment that does not demand constant specialist servicing.
Our hydraulic and NC ranges are particularly well suited to workshops working with tighter capital budgets, while our CNC series remains available for larger fabricators supplying construction, furniture-adjacent metalwork, and general industrial contracts. We work directly with workshop owners across Beirut, Tripoli, and the surrounding industrial areas to recommend machines that match their real production needs and budget.
Press Brake Machines in Lebanon
Lebanon’s fabrication workshops, many still recovering capacity after recent economic disruption, need press brakes that deliver reliable output without high running costs or dependence on specialist technicians. Energy Mission’s press brake range covers hydraulic, NC, and CNC control, giving fabricators in Lebanon options at different price points and automation levels. Every frame is built and tested to IMTMA standards, machined on a Floor Boring Machine, and mounted on a 12-point roller bearing upper beam for long-term bending accuracy, an important consideration when replacing a machine is not a simple decision.
CNC Press Brake Machine in Lebanon
For Lebanese fabricators supplying larger construction contracts or export-oriented production, a CNC press brake machine reduces material waste and labour cost per part, both critical in a market where imported steel is expensive and margins are tight. Energy Mission builds six CNC press brake series, allowing workshops to select a tonnage and automation level that matches their actual order volume rather than overinvesting in capacity they will not use.
The Optima series covers 25 MT to 325 MT capacity across bed lengths of 1250 mm to 8000 mm, with servo motor plus hydraulic pump drive on the Y1 and Y2 axis cutting power consumption by 45 to 50 percent, a meaningful saving where electricity costs and supply reliability remain a real business concern. It runs on the CybTouch 8PS controller from CYBELEC, Switzerland, with a rigid upper beam on 12-point roller bearings.
The Splendid series (30 MT to 400 MT) offers similar energy savings of 40 to 45 percent at a lower entry cost, while the Efficient series scales up to 2000 MT for heavier structural and industrial work. For workshops needing to bend very long structural members, the Tandem/Tridem series synchronises two or more press brakes under one controller, and the Magnum series (100 MT to 2000 MT) adds deeper throat depth for complex bending. Smaller workshops in Lebanon often find the Prudent series, 25 MT to 160 MT with an ESA S630 controller from Italy, the most practical entry point into CNC bending.
All CNC series use servo hydraulics from HAWE Germany or ATOS Italy and an AC servo backgauge on hardened ball screw and LM guides. Request a quote for a CNC press brake for your Lebanon workshop.
Hydraulic Press Brake Machine in Lebanon
For the majority of Lebanon’s fabrication workshops, particularly smaller operations producing structural brackets, gates, general steel fittings, and furniture-adjacent metalwork, a conventional hydraulic press brake remains the most practical and cost-effective choice. It requires less specialist electronics knowledge to operate and maintain, an important factor where finding qualified CNC technicians locally can be difficult and costly.
Energy Mission’s Hydraulic Press Brake is available from 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed length. It uses a rear cylinder design with compact cylinders and a low-pressure hydraulic system for better rigidity and fatigue resistance, with positive synchronisation through a welded torque tube for consistent bend angles. Repeatability is rated at plus or minus 0.05 mm, suitable for most general fabrication and structural work.
The frame is built from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards, with a ram tilting arrangement that preserves bending accuracy as the machine ages, valuable for a workshop planning to run the same machine for many years without replacement. Standard equipment includes an unhardened multi-V die and semi gooseneck punch, front manual backgauge with micro-adjustment fingers, lead screws, double rod guides, and chain drive synchronisation, everything needed to begin production immediately.
Because the machine supports on-site NC upgradation, Lebanese fabricators can start with the base hydraulic model and add digital positioning later as the business recovers and grows, rather than committing to a full CNC purchase upfront. Optional upgrades include a multistep DRO from DELTA, hardened and ground segmented dies, and a motorised backgauge with DRO from HENGSTLER, Germany, all addable at a later stage.
This is the machine we recommend most often for Lebanese workshops prioritising a manageable upfront cost and long service life. Enquire about the Hydraulic Press Brake here.
NC Press Brake (Front Cylinder) in Lebanon
An NC press brake with front cylinder design offers Lebanese fabricators a practical step up from manual hydraulic operation, adding digital backgauge positioning without the higher cost of a full CNC system. It suits workshops producing repeat parts for construction fittings, enclosures, and general fabrication contracts, where consistent bend positioning saves setup time on every job.
The NC Press Brake (Front Cylinder) is built from 30 MT to 600 MT capacity, 1250 mm to 8000 mm bed length, with a frame manufactured from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards. Repeatability is held to plus or minus 0.03 mm, and cylinders are positively synchronised through a welded torque tube.
Hydraulic cylinders use seamless honed tube construction with hardened and chrome plated piston rods and twin-type zero-leak PU seals, built for long service life with minimal maintenance intervention. The standard controller is an Estun E-21 for the X-axis, with the backgauge running on ball screw and guide rod for repeatable positioning.
Because this model supports on-site NC upgradation, workshops can start with the base configuration and later add an ESTUN E200/300 controller, a Schneider controller, or a CYBELEC TOUCH 8P controller, plus hardened and ground segmented dies and punches, quick release clamps, or Allen key type clamps, as production volumes and available capital allow. This upgrade path suits the pace at which many Lebanese fabrication businesses are currently rebuilding their operations. Get a quote for the NC Press Brake (Front Cylinder).
NC Press Brake (Rear Cylinder) in Lebanon
The rear cylinder NC press brake gives Lebanese fabricators genuine two-axis digital control, both bend angle and backgauge position, at a lower cost than a full CNC system, well suited to workshops running mixed batch production where job types change often but each still requires accurate, repeatable bending.
The NC Press Brake (Rear Cylinder) covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, running on a Cyb Touch 8P touchscreen two-axis controller from CYBELEC, Switzerland, displayed on a 5.7 inch colour graphic LED backlit screen. Operators can store up to 200 programs, with as many as 24 bends and individual backgauge positions saved per program, useful for smaller Lebanese workshops that need to switch between many different job types across a single week.
Backgauge position accuracy is held to 0.1 mm, and the machine includes programmable backgauge retraction, angle correction, backgauge correction, open height per bend, and a job counter. A 5-micron accuracy press brake scale on the Y-axis delivers repeatability of plus or minus 0.03 mm, and the high speed AC servo backgauge rides on hardened ball screw and LM guides with timer belt drive.
This machine is well suited to workshops handling both custom, one-off orders and small batch production, a common pattern in Lebanon’s current fabrication market where large standardised contracts are less frequent than varied, smaller jobs. Optional upgrades include a Force Control Module, DA-41T Delem NC controller, quick release clamps, and hardened and ground segmented dies. Request pricing for the NC Press Brake (Rear Cylinder).
Shearing Machines in Lebanon
Clean, accurate cutting is the starting point for every fabrication job in Lebanon, whether it is structural steel for a rebuilding project or sheet metal for general industrial work. Energy Mission’s shearing range spans hydraulic, CNC, and NC control, all built around a rigid box-type structure and four-edge interchangeable hardened blades that reduce running costs, an important factor for Lebanese workshops managing tight operating budgets.
Hydraulic Shearing Machine in Lebanon
The Hydraulic Shearing Machine, part of our HVR series, is a guillotine-type machine with a hydraulically variable rake angle, giving Lebanese fabricators the flexibility to cut thin sheet with a lower rake angle for twist-free results, or switch to a higher rake angle for higher cutting capacity when handling heavier structural plate. This versatility is valuable for workshops that cannot afford separate machines for different material thicknesses.
The structure is a rigid box-type design for both ram and table, with an inclined member aligned to the direction of resultant cutting force, extending machine life under continuous use. Blades are four-edge interchangeable HcHCr hardened and ground steel, suitable for both mild steel and stainless steel, and the blade gap is pre-calibrated for automatic adjustment, giving operators burr-free cuts without manual fine-tuning. The ram is guided by six hardened ground guide rollers, and the holding cylinder uses a sandwich bolted square box design that simplifies maintenance, an important detail where sourcing specialist parts locally can take time.
Electrical panels use Siemens, Schneider, or BCH components, and the machine includes hydraulic and electrical safety interlocks against overloading. Optional backgauge upgrades include a single step motorised backgauge with DRO from HENGSTLER, Germany, a multi-step motorised backgauge with touchscreen DRO from DELTA, Taiwan, or a high speed NC backgauge with VFD from Schneider, along with a ball transfer table for faster sheet loading. Enquire about the Hydraulic Shearing Machine.
CNC Shearing Machine in Lebanon
For Lebanese fabricators with higher throughput requirements, particularly contractors cutting standardised plate for construction or export orders, the CNC Shearing Machine automates positioning and cutting sequences, reducing labour cost per part over the life of the machine. It uses the same hydraulically variable rake angle blade system as the HVR series, with a servo-driven backgauge capable of positioning speeds up to 500 mm per second and repeatability of plus or minus 0.1 mm.
The CNC touchscreen controller stores hundreds of cutting programs, letting operators recall a job instantly rather than resetting the backgauge manually each time. Automatic blade gap compensation adjusts by material thickness, maintaining consistent cut quality, and multi-step programmable backgauge sequences allow a single sheet to be cut into several widths in one continuous run. An optional ball transfer table speeds up loading of heavier sheet.
This machine suits Lebanese fabricators who have reached a scale where automation pays for itself through reduced labour and material waste. Get a quote for the CNC Shearing Machine.
NC Shearing Machine in Lebanon
The NC Shearing Machine sits between the hydraulic and CNC models, adding digital backgauge positioning at a more accessible price point than a full CNC system, a practical middle step for Lebanese workshops that want repeatable accuracy without a large capital outlay. It runs on an NC backgauge with DRO, available as a HENGSTLER, Germany single step unit or a DELTA, Taiwan multi-step unit, with backgauge positioning accuracy of plus or minus 0.1 mm.
Operators can store up to 25 step positions in a multi-step program, useful for repeat cutting patterns in structural and general fabrication work. Like the rest of the shearing range, it retains the variable rake angle for material versatility and four-edge interchangeable HcHCr blades for long service life between sharpening. Because the machine is NC upgradable from the hydraulic base model, Lebanese fabricators can start with a standard hydraulic shear and add NC positioning later as demand and available capital grow. Request pricing for the NC Shearing Machine.
Plate Rolling Machines in Lebanon
Storage tanks, structural columns, and general industrial cylinders remain steady work for Lebanon’s metalworking sector, and all of them depend on accurately rolled plate. Energy Mission’s plate rolling range covers 3-roll and 4-roll configurations built from alloy steel rolls, with hydraulic control systems designed to deliver consistent results without requiring extensive operator training.
3 Roll DP Series Machine in Lebanon
The 3 Roll DP Series is a pyramid-type plate rolling machine handling 6 mm to 80 mm plate thickness across working widths of 1500 mm to 4000 mm, sized to match the tank and structural fabrication work common in Lebanon’s industrial districts. The top roll stays fixed while both bottom rolls move independently via separate hydraulic cylinders, and both bottom rolls are power-driven through a planetary gearbox with hydraulic motor for consistent torque during the roll.
Rolls are made from alloy steel, and the machine includes a double pre-pinching arrangement, reducing the flat, unrolled section left at each end of the plate, which cuts down on rework and wasted material, a real cost concern in the current market. A built-in cone bending attachment adds versatility for tapered sections, and the hydraulic dropper end makes removing finished cylinders straightforward. Overload protection guards against operator error, and digital readout on both bottom roll positions helps operators repeat settings accurately.
Standard equipment includes an extended shaft for profile bending and digital readout, while optional upgrades include hardened and ground rolls, automatic lubrication, a material feed table, NC controls, side and top support for large diameter work, top roll drive, and interchangeable top rolls. Enquire about the 3 Roll DP Series.
3 Roll HM Series Machine in Lebanon
The 3 Roll HM Series uses a hydraulic initial pinch design, giving Lebanese fabricators minimum flat end pre-bending capability, useful for tanks and vessels where a tight, uniform curve from end to end matters for weld quality. Hydraulic top roll side movement allows conical rolling for tapered components, and each roll position is controlled independently through hydraulics for precise adjustment during the job.
Both drive rolls are powered, delivering uniform torque distribution through the rolling process, and rolls are made from high-tensile alloy steel, precision ground for consistent surface contact with the plate. The hydraulic dropper end simplifies part removal once rolling is complete. NC position control with digital display comes standard, with a full CNC upgrade available for workshops planning to scale toward higher precision production as the market recovers.
This machine is a strong option for Lebanese contractors supplying pressure vessel and tank fabricators who need tighter tolerance rolling than a basic pyramid-type machine can offer. Get a quote for the 3 Roll HM Series.
4 RL DP Series Machine in Lebanon
The 4 RL DP Series uses a four-roll design, a fixed top roll, a pinch roll, and two independent side bending rolls, allowing single-pass pre-bending of both plate ends without reversing or re-feeding the plate. For Lebanese fabricators running production against tight delivery timelines, this cuts handling time significantly compared to a 3-roll machine, where each end typically needs a separate pre-bending pass.
Position control for all four rolls can be specified as CNC or NC, with digital position readout across all rolls so operators can repeat settings precisely between jobs. Each side roll is controlled independently through hydraulics, and the top roll and pinch roll are both driven, delivering the torque needed for heavier plate without slippage. Rolls are manufactured from high-tensile forged alloy steel, hardened and precision ground. A hydraulic dropper end simplifies removal of the finished cylinder.
This is the machine we recommend for higher-volume tank and pipe fabricators in Lebanon looking to maximise throughput as production capacity rebuilds. Request pricing for the 4 RL DP Series.
Frequently Asked Questions
1. Does Energy Mission export press brake, shearing, and plate rolling machines directly to Lebanon?
2. Given recent economic conditions, does Energy Mission offer machines suited to smaller capital budgets?
3. Can a hydraulic machine be upgraded to NC or CNC later once my workshop's order volume grows?
4. How does Energy Mission support spare parts and service access for machines operating in Lebanon?
5. What is the typical lead time and shipping process for machinery ordered for Lebanon?
Contact Energy Mission for Metalworking Equipment in Lebanon
Whether you are rebuilding workshop capacity or expanding into new fabrication contracts, Energy Mission can recommend the right press brake, shearing, or plate rolling machine for your operation in Lebanon, at a price point that matches your current stage of growth. Contact us here to request a quote and shipping timeline.