Press Brake Machines and Metalworking Equipment Supplier
in Saudi Arabia
Saudi Arabia’s fabrication sector is scaling up fast, driven by Vision 2030 megaprojects, industrial city expansion at Jubail and Yanbu, and a growing localisation push that rewards fabricators with reliable, high-capacity production equipment. Energy Mission Machineries supplies press brake machines, shearing machines, and plate rolling machines built for exactly this scale, with tonnage ranging from small workshop machines up to 6000 MT Tridem systems for heavy structural work.
Fabricators across Saudi Arabia use our equipment to produce structural steel, pressure vessels, pipeline components, and architectural metalwork for projects tied to NEOM, the Red Sea developments, and the Kingdom’s expanding oil and gas and petrochemical infrastructure. We work with contractors and fabrication houses to specify the right tonnage, bed length, and control system for high-volume, long-term production.
Press Brake Machines in Saudi Arabia
Saudi Arabia’s construction and industrial sector demands press brakes that can handle both high-volume repeat production and heavy plate work for pressure vessels and structural steel. Energy Mission’s press brake range spans from compact 25 MT machines for light fabrication up to 6000 MT Tridem systems for the heaviest structural work, giving fabricators across the Kingdom a full range of options as they scale operations to meet Vision 2030 project demand. Every frame is built and tested to IMTMA standards, machined on a Floor Boring Machine, and mounted on a 12-point roller bearing upper beam for long-term bending accuracy.
CNC Press Brake Machine in Saudi Arabia
Large-scale fabricators supplying structural steel, pressure vessels, and architectural components for Saudi Arabia’s megaprojects need press brakes capable of consistent, high-tonnage bending across long production runs. Energy Mission’s CNC press brake range covers six series built for exactly this kind of scale.
The Optima series runs 25 MT to 325 MT across 1250 mm to 8000 mm bed length, with servo motor plus hydraulic pump drive on the Y1 and Y2 axis reducing power consumption by 45 to 50 percent, an important saving for fabricators running multiple machines across long shifts. It uses the CybTouch 8PS controller from CYBELEC, Switzerland, with beam speed up to 220 mm per second approach and 16 mm per second pressing.
The Splendid series (30 MT to 400 MT) delivers 40 to 45 percent energy savings with the same control platform, while the Efficient series scales to 2000 MT for heavy plate and pressure vessel fabrication common at Jubail and Yanbu industrial complexes, with a frame built from ultrasonically and tensile tested IS:2062 grade steel.
For the heaviest structural work, lighting poles, wind towers, and long steel members used in infrastructure and industrial city projects, the Tandem/Tridem series synchronises two or more press brakes under one controller, scaling from 100 MT to 6000 MT and up to 24000 mm in length. The Magnum series (100 MT to 2000 MT) adds greater throat depth and daylight for deep, complex bends, and the Prudent series (25 MT to 160 MT) suits smaller specialist fabricators with an ESA S630 controller from Italy.
All CNC series use servo hydraulics from HAWE Germany or ATOS Italy, self-centred hardened and ground segmented die and punch, and a high speed AC servo backgauge. Optional stress relieved structure and automatic angle measurement suit fabricators targeting the tighter quality specifications required on Saudi industrial contracts. Contact us to specify a CNC press brake for your Saudi Arabia facility.
Hydraulic Press Brake Machine in Saudi Arabia
General fabricators across Saudi Arabia producing structural brackets, enclosures, and mid-volume components often find better value in a well-built conventional hydraulic press brake rather than a fully automated CNC system, particularly for workshops running varied job types rather than long repeat production runs.
Energy Mission’s Hydraulic Press Brake covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed length. It uses a rear cylinder design with compact cylinders and a low-pressure hydraulic system, delivering better rigidity and fatigue resistance for machines expected to run continuously across the Kingdom’s industrial production schedules. Positive synchronisation through a welded torque tube keeps bend angles consistent along the full beam, with repeatability rated at plus or minus 0.05 mm.
The frame is built from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards, and a ram tilting arrangement maintains bending accuracy as the machine accumulates operating hours over years of continuous production. Fast approach and return speed keeps cycle times productive, while a slower, controlled pressing stroke protects final bend accuracy.
Standard fittings include an unhardened multi-V die and semi gooseneck punch, front manual backgauge with micro-adjustment fingers, lead screws, double rod guides, and chain drive synchronisation. The machine supports on-site NC upgradation, so a fabricator can begin with the base hydraulic configuration and add a multistep DRO from DELTA, a motorised backgauge with DRO from HENGSTLER, Germany, or a high speed NC backgauge from Schneider with VFD as production volumes grow.
This machine is a dependable entry point for Saudi fabricators building out production capacity while keeping capital costs manageable. Request a quote for the Hydraulic Press Brake.
NC Press Brake (Front Cylinder) in Saudi Arabia
The front cylinder NC press brake gives Saudi fabricators digital backgauge positioning at a lower investment than full CNC, well suited to workshops producing repeat components for HVAC, structural, and general fabrication contracts where consistent positioning across long production runs matters.
The NC Press Brake (Front Cylinder) is available from 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, with a frame of ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards. Repeatability is held to plus or minus 0.03 mm, and cylinders are positively synchronised through a welded torque tube. Fast approach and return speed, combined with a slower controlled pressing stroke, protects accuracy without slowing throughput.
Hydraulic cylinders use seamless honed tube construction with hardened, chrome plated piston rods and twin-type zero-leak PU seals, built to withstand heat and dust conditions common across Saudi Arabia’s industrial regions. The standard controller is an Estun E-21 for the X-axis, with the backgauge running on ball screw and guide rod for repeatable positioning.
Because this model supports on-site NC upgradation, fabricators can later add an ESTUN E200/300 controller, a Schneider controller, or a CYBELEC TOUCH 8P controller, plus hardened and ground segmented dies, quick release clamps, or Allen key type clamps, scaling automation in step with order volume. Get a quote for the NC Press Brake (Front Cylinder).
NC Press Brake (Rear Cylinder) in Saudi Arabia
For Saudi fabricators running mixed batch production where job types change frequently but each still requires accurate, repeatable bending, the rear cylinder NC press brake delivers genuine two-axis digital control without the cost of a full CNC system.
The NC Press Brake (Rear Cylinder) covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, running on a Cyb Touch 8P touchscreen two-axis controller from CYBELEC, Switzerland, displayed on a 5.7 inch colour graphic LED backlit screen and controlling both Y-axis bend angle and X-axis backgauge position. Operators can store up to 200 programs with up to 24 bends and individual backgauge positions each, useful for fabricators running many different part profiles across their contract portfolio.
Backgauge position accuracy is 0.1 mm, with programmable backgauge retraction, angle correction, backgauge correction, open height per bend, and a job counter for production tracking, a valuable feature for Saudi fabricators reporting output against large project schedules. A 5-micron accuracy press brake scale on the Y-axis delivers repeatability of plus or minus 0.03 mm, and the high speed AC servo backgauge rides on hardened ball screw and LM guides with timer belt drive.
This machine handles fast changeover between sample production and mass production runs, well suited to fabricators serving both custom architectural work and standardised industrial contracts. Optional upgrades include a Force Control Module, DA-41T Delem NC controller, quick release clamps, and hardened and ground segmented dies. Request pricing for the NC Press Brake (Rear Cylinder).
Shearing Machines in Saudi Arabia
Consistent, accurate cutting underpins production across Saudi Arabia’s structural steel, pressure vessel, and pipeline fabrication sectors, where large plate volumes need to be processed quickly without sacrificing edge quality. Energy Mission’s shearing machines use a rigid box-type structure and four-edge interchangeable HcHCr hardened blades across hydraulic, CNC, and NC control options, matched to the throughput requirements of fabricators supplying Saudi’s industrial cities and megaprojects.
Hydraulic Shearing Machine in Saudi Arabia
The Hydraulic Shearing Machine, from our HVR series, uses a hydraulically variable rake angle, letting fabricators in Saudi Arabia cut thinner sheet at a lower rake angle for twist-free edges, or switch to a higher rake angle for cutting capacity beyond the machine’s standard rating on heavier structural plate.
The ram and table use a rigid box-type structure with an inclined member set in the direction of resultant cutting force, reducing deflection under continuous heavy use common in industrial fabrication shops at Jubail and Yanbu. Blades are four-edge interchangeable HcHCr hardened and ground steel, suitable for mild steel and stainless steel, with pre-calibrated automatic blade gap adjustment for burr-free cuts. The ram is guided by six hardened ground guide rollers for consistent quality across the full table width, and the holding cylinder uses a sandwich bolted square box design that simplifies maintenance.
Electrical panels use Siemens, Schneider, or BCH components with hydraulic and electrical safety interlocks against overloading. Optional upgrades include a single step motorised backgauge with DRO from HENGSTLER, Germany, a multi-step motorised backgauge with touchscreen DRO from DELTA, Taiwan, a high speed NC backgauge with VFD from Schneider, and a ball transfer table for faster sheet handling. Enquire about the Hydraulic Shearing Machine.
CNC Shearing Machine in Saudi Arabia
Large fabricators processing standardised plate volumes for pipeline, tank, and structural steel contracts benefit most from the CNC Shearing Machine, which automates backgauge positioning and cutting sequences to keep output consistent across long production runs.
It uses the same hydraulically variable rake angle blade system as the HVR series, with a servo-driven backgauge capable of positioning speeds up to 500 mm per second and repeatability of plus or minus 0.1 mm. The CNC touchscreen controller stores hundreds of cutting programs, letting operators recall a job instantly, a significant time saving for fabricators supplying multiple concurrent Vision 2030 project contracts. Automatic blade gap compensation adjusts by material thickness, and multi-step programmable backgauge sequences allow a single sheet to be cut into multiple widths in one pass. An optional ball transfer table speeds up loading of heavier plate common in industrial fabrication work.
This is the shearing machine we recommend for Saudi fabricators scaling toward high-volume, standardised production where consistency and labour efficiency directly affect project margins. Get a quote for the CNC Shearing Machine.
NC Shearing Machine in Saudi Arabia
The NC Shearing Machine gives Saudi fabricators digital backgauge accuracy without the full programmability of a CNC system, a practical choice for workshops running a defined range of standard cutting patterns rather than highly varied production. It runs on an NC backgauge with DRO, offered as a HENGSTLER, Germany single step unit or a DELTA, Taiwan multi-step unit, with positioning accuracy of plus or minus 0.1 mm and up to 25 stored step positions in the multi-step configuration.
The machine retains the variable rake angle for cutting flexibility across material types and grades, along with the same four-edge interchangeable HcHCr blades used across the shearing range. Because it is NC upgradable from the hydraulic base machine, Saudi fabricators can start with a standard hydraulic shear and add digital positioning as contract volumes increase, preserving their initial capital investment while scaling capability. Request pricing for the NC Shearing Machine.
Plate Rolling Machines in Saudi Arabia
Pipeline sections, storage tanks, and pressure vessels form the backbone of Saudi Arabia’s oil, gas, and petrochemical fabrication industry, and all depend on plate rolling machines capable of consistent curvature across large plate volumes. Energy Mission’s 3-roll and 4-roll machines, built with alloy steel rolls and independent hydraulic roll control, are sized to match the scale of fabrication work seen at Jubail, Yanbu, and other Saudi industrial hubs.
3 Roll DP Series Machine in Saudi Arabia
The 3 Roll DP Series is a pyramid-type plate rolling machine handling 6 mm to 80 mm plate thickness across working widths of 1500 mm to 4000 mm, sized for the tank, pipe, and structural fabrication work common across Saudi Arabia’s oil, gas, and petrochemical sectors. The top roll stays fixed while both bottom rolls move independently through separate hydraulic cylinders, and both bottom rolls are power-driven through a planetary gearbox with hydraulic motor for consistent torque.
A double pre-pinching arrangement reduces the flat, unrolled section left at each plate end, cutting rework on large production runs. The built-in cone bending attachment adds versatility for tapered pipe sections, and the hydraulic dropper end simplifies removal of finished cylinders. Overload protection and digital readout on both bottom roll positions give operators repeatable, trackable results, and a manual centralised lubrication system keeps upkeep manageable for busy fabrication shops.
Standard equipment includes an extended shaft for profile bending and digital readout, with optional hardened and ground rolls, automatic lubrication, a material feed table, NC controls, side and top support for large diameter work, top roll drive, and interchangeable top rolls. Enquire about the 3 Roll DP Series.
3 Roll HM Series Machine in Saudi Arabia
The 3 Roll HM Series uses a hydraulic initial pinch design with minimum flat end pre-bending, an important feature for Saudi fabricators producing pressure vessels and tanks for petrochemical infrastructure, where a tight, uniform curve from end to end is essential for weld integrity. Hydraulic top roll side movement enables conical rolling, and each roll position is controlled independently through hydraulics for precise mid-job adjustment.
Both drive rolls are powered for uniform torque distribution, reducing plate slippage during heavy rolling, and rolls are made from high-tensile alloy steel, precision ground for consistent surface contact. The hydraulic dropper end simplifies part removal, and NC position control with digital display comes standard, with a full CNC upgrade available for fabricators scaling toward tighter tolerance production for export-grade pressure vessel work. Get a quote for the 3 Roll HM Series.
4 RL DP Series Machine in Saudi Arabia
The 4 RL DP Series uses a four-roll design, a fixed top roll, a pinch roll, and two independent side bending rolls, enabling single-pass pre-bending of both plate ends without reversing the sheet. For Saudi fabricators running production against tight megaproject schedules, this significantly reduces handling time compared to a 3-roll machine, where each end typically requires a separate pass.
Position control across all four rolls can be specified as CNC or NC, with digital position readout for repeatable settings between jobs. Each side roll is controlled independently through hydraulics, and both the top roll and pinch roll are driven, delivering the torque needed for heavier plate without slippage. Rolls are manufactured from high-tensile forged alloy steel, hardened and precision ground, built to hold accuracy over years of continuous industrial production. A hydraulic dropper end simplifies removal of the finished cylinder, and CNC side roll position control supports accurate conical rolling for tapered pipeline sections.
This is the machine we recommend for high-volume Saudi tank and pipe fabricators who need to maximise throughput without sacrificing plate-end accuracy on large industrial contracts. Request pricing for the 4 RL DP Series.
Frequently Asked Questions
1. Does Energy Mission supply large-tonnage Tandem and Tridem press brakes for Saudi Arabia's megaprojects?
2. Can Energy Mission machines be specified to meet local content or IKTVA-related documentation requirements?
3. What tonnage press brake is recommended for pressure vessel fabrication at industrial cities like Jubail or Yanbu?
4. How does Energy Mission support after-sales service for machinery operating in Saudi Arabia?
5. What is the typical lead time for large-tonnage machinery ordered for Saudi Arabia?
Contact Energy Mission for Metalworking Equipment in Saudi Arabia
From Vision 2030 infrastructure projects to the industrial fabrication hubs at Jubail and Yanbu, Energy Mission supplies the press brake, shearing, and plate rolling machines that Saudi Arabia’s fabrication sector relies on to meet scale and schedule demands. Contact us here to discuss your production requirements and receive a detailed quote with shipping timelines.