Press Brake Machines and Metalworking Equipment Supplier
in Oman
Oman’s industrial growth is centred on its ports and free zones, Duqm Special Economic Zone, Sohar Port and Freezone, and Salalah, where oil and gas midstream projects, shipbuilding and dry dock work, and an expanding mining and metals sector are driving demand for reliable fabrication equipment. Energy Mission Machineries supplies press brake machines, shearing machines, and plate rolling machines to fabricators across Oman producing pipeline components, storage tanks, structural steel, and marine fabrication parts.
Our machines, built with CYBELEC Switzerland controllers and servo hydraulics from HAWE Germany and ATOS Italy, are engineered for the heavy plate work common at Duqm’s dry dock and refinery projects, while our NC and hydraulic ranges suit smaller fabricators supplying Muscat’s construction and general industrial sector.
Press Brake Machines in Oman
Oman’s fabrication sector spans everything from precision ducting for Muscat’s construction projects to heavy structural steel for Duqm’s refinery and dry dock developments, and press brake requirements vary accordingly. Energy Mission’s press brake range covers CNC, NC, and hydraulic control across a wide tonnage band, with frames machined on a Floor Boring Machine and mounted on a 12-point roller bearing upper beam, giving fabricators in Oman the rigidity needed for both light architectural work and heavy plate bending.
CNC Press Brake Machine in Oman
Fabricators supplying Oman’s oil and gas, marine, and construction sectors need press brakes that combine accuracy with the flexibility to switch between job types quickly. Energy Mission’s CNC press brake range spans six series suited to different production scales.
The Optima series runs 25 MT to 325 MT across 1250 mm to 8000 mm bed length, with servo motor plus hydraulic pump drive on the Y1 and Y2 axis reducing power consumption by 45 to 50 percent, and beam speed up to 220 mm per second approach, 16 mm per second pressing. It runs on the CybTouch 8PS controller from CYBELEC, Switzerland.
The Splendid series (30 MT to 400 MT) delivers 40 to 45 percent energy savings with the same controller platform, and the Efficient series scales up to 2000 MT for heavy plate work, a strong fit for refinery and dry dock fabrication at Duqm and Sohar, with a frame built from ultrasonically and tensile tested IS:2062 grade steel.
For long structural members used in infrastructure and industrial projects, the Tandem/Tridem series synchronises two or more press brakes under one controller for lengths up to 24000 mm, while the Magnum series (100 MT to 2000 MT) adds greater throat depth for deep or complex bends common in marine fabrication. The Prudent series (25 MT to 160 MT) suits smaller fabricators in Muscat and the northern governorates, running on an ESA S630 controller from Italy.
All CNC series use servo hydraulics from HAWE Germany or ATOS Italy, self-centred hardened and ground segmented die and punch, and optional stress relieved structure for the demanding tolerances required in marine and refinery fabrication work. Contact us to specify a CNC press brake for your Oman facility.
Hydraulic Press Brake Machine in Oman
Many general fabricators across Oman, particularly workshops supplying Muscat’s construction sector or smaller contractors near Sohar and Salalah, get better value from a robust conventional hydraulic press brake than a fully automated CNC system, especially where job types vary and production volumes are moderate.
Energy Mission’s Hydraulic Press Brake covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed length. It uses a rear cylinder design with compact cylinders and a low-pressure hydraulic system, delivering better rigidity and fatigue resistance for continuous operation. Positive synchronisation through a welded torque tube keeps bend angles consistent along the full beam, with repeatability rated at plus or minus 0.05 mm.
The frame is built from ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards, with a ram tilting arrangement that preserves bending accuracy as the machine accumulates operating hours over years of use. Fast approach and return speed keeps cycle times productive, while a slower, controlled pressing stroke protects final bend accuracy.
Standard fittings include an unhardened multi-V die and semi gooseneck punch, front manual backgauge with micro-adjustment fingers, lead screws, double rod guides, and chain drive synchronisation. The machine supports on-site NC upgradation, letting fabricators in Oman start with the base hydraulic configuration and add a multistep DRO from DELTA, a motorised backgauge with DRO from HENGSTLER, Germany, or a high speed NC backgauge from Schneider with VFD as production needs grow.
This remains our most recommended entry point for Omani fabricators prioritising durability and manageable maintenance. Request a quote for the Hydraulic Press Brake.
NC Press Brake (Front Cylinder) in Oman
The front cylinder NC press brake gives Omani fabricators digital backgauge positioning at a lower cost than full CNC, well suited to workshops producing repeat components for pipeline supports, structural brackets, and marine fittings where consistent positioning matters more than complex multi-axis programming.
The NC Press Brake (Front Cylinder) is available from 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, with a frame of ultrasonically and tensile tested IS:2062 grade steel to IMTMA standards. Repeatability is held to plus or minus 0.03 mm, and cylinders are positively synchronised through a welded torque tube. Fast approach and return speed, combined with a slower controlled pressing stroke, protects accuracy without slowing production.
Hydraulic cylinders use seamless honed tube construction with hardened, chrome plated piston rods and twin-type zero-leak PU seals, built for the heat and coastal humidity conditions common in Oman’s port cities. The standard controller is an Estun E-21 for the X-axis, with the backgauge running on ball screw and guide rod.
Because this model supports on-site NC upgradation, fabricators can later add an ESTUN E200/300 controller, a Schneider controller, or a CYBELEC TOUCH 8P controller, plus hardened and ground segmented dies, quick release clamps, or Allen key type clamps, scaling automation as order volumes grow. Get a quote for the NC Press Brake (Front Cylinder).
NC Press Brake (Rear Cylinder) in Oman
For Omani fabricators running mixed batch production, where job types shift frequently but each still requires accurate, repeatable bending, the rear cylinder NC press brake delivers genuine two-axis digital control without the investment level of a full CNC system.
The NC Press Brake (Rear Cylinder) covers 30 MT to 600 MT capacity across 1250 mm to 8000 mm bed lengths, running on a Cyb Touch 8P touchscreen two-axis controller from CYBELEC, Switzerland, with a 5.7 inch colour graphic LED backlit screen controlling both Y-axis bend angle and X-axis backgauge position. Operators can store up to 200 programs with up to 24 bends and individual backgauge positions each, useful for fabricators managing varied marine, pipeline, and structural component profiles.
Backgauge position accuracy is 0.1 mm, with programmable backgauge retraction, angle correction, backgauge correction, open height per bend, and a job counter for production tracking. A 5-micron accuracy press brake scale on the Y-axis delivers repeatability of plus or minus 0.03 mm, and the high speed AC servo backgauge rides on hardened ball screw and LM guides with timer belt drive.
This machine handles fast changeover between sample production and mass production, useful for Omani fabricators serving both one-off marine or industrial projects and standardised contract work. Optional upgrades include a Force Control Module, DA-41T Delem NC controller, quick release clamps, and hardened and ground segmented dies. Request pricing for the NC Press Brake (Rear Cylinder).
Shearing Machines in Oman
From pipeline plate for Duqm’s refinery projects to hull sections for Sohar’s shipbuilding and repair yards, Oman’s fabrication sector depends on shearing machines that deliver clean, accurate cuts across a wide range of material thicknesses. Energy Mission’s shearing machines combine a rigid box-type structure with four-edge interchangeable HcHCr hardened blades across hydraulic, CNC, and NC control options.
Hydraulic Shearing Machine in Oman
The Hydraulic Shearing Machine, from our HVR series, uses a hydraulically variable rake angle, giving fabricators in Oman the flexibility to cut thinner sheet at a lower rake angle for twist-free edges, or switch to a higher rake angle for cutting capacity beyond the machine’s standard rating on structural or hull plate.
The ram and table use a rigid box-type structure with an inclined member set in the direction of resultant cutting force, reducing deflection under continuous heavy use common in shipbuilding and refinery fabrication yards. Blades are four-edge interchangeable HcHCr hardened and ground steel, suitable for mild steel and stainless steel, with pre-calibrated automatic blade gap adjustment for burr-free cuts. The ram is guided by six hardened ground guide rollers for consistent quality across the full table width, and the holding cylinder uses a sandwich bolted square box design that simplifies maintenance.
Electrical panels use Siemens, Schneider, or BCH components with hydraulic and electrical safety interlocks against overloading. Optional upgrades include a single step motorised backgauge with DRO from HENGSTLER, Germany, a multi-step motorised backgauge with touchscreen DRO from DELTA, Taiwan, a high speed NC backgauge with VFD from Schneider, and a ball transfer table for faster sheet handling. Enquire about the Hydraulic Shearing Machine.
CNC Shearing Machine in Oman
Fabricators processing standardised plate volumes for pipeline, tank, or marine hull work, common around Duqm and Sohar, benefit most from the CNC Shearing Machine, which automates backgauge positioning and cutting sequences for consistent output across long production runs.
It uses the same hydraulically variable rake angle blade system as the HVR series, with a servo-driven backgauge capable of positioning speeds up to 500 mm per second and repeatability of plus or minus 0.1 mm. The CNC touchscreen controller stores hundreds of cutting programs, letting operators recall a job instantly rather than resetting manually, saving time on multi-project fabrication yards. Automatic blade gap compensation adjusts by material thickness, and multi-step programmable backgauge sequences allow a single sheet to be cut into multiple widths in one pass. An optional ball transfer table speeds up loading of heavier plate.
This machine suits Omani fabricators scaling toward high-volume, standardised production for the energy and marine sectors. Get a quote for the CNC Shearing Machine.
NC Shearing Machine in Oman
The NC Shearing Machine gives Omani fabricators digital backgauge accuracy without the full programmability of a CNC system, a practical fit for workshops running a defined range of standard cutting patterns. It runs on an NC backgauge with DRO, offered as a HENGSTLER, Germany single step unit or a DELTA, Taiwan multi-step unit, with positioning accuracy of plus or minus 0.1 mm and up to 25 stored step positions in the multi-step configuration.
The machine retains the variable rake angle for cutting flexibility across material types and grades, with the same four-edge interchangeable HcHCr blades used across the shearing range. Because it is NC upgradable from the hydraulic base machine, fabricators in Oman can start with a standard hydraulic shear and add digital positioning as contract volumes grow, protecting their initial capital investment. Request pricing for the NC Shearing Machine.
Plate Rolling Machines in Oman
Pipeline sections, storage tanks, and ship hull plate all depend on accurate plate rolling, and Oman’s growing role as a logistics and heavy industry hub around Duqm, Sohar, and Salalah has pushed demand for reliable rolling machines higher. Energy Mission’s 3-roll and 4-roll machines, built with alloy steel rolls and independent hydraulic roll control, are sized to serve both refinery-scale fabrication and smaller marine and structural work.
3 Roll DP Series Machine in Oman
The 3 Roll DP Series is a pyramid-type plate rolling machine handling 6 mm to 80 mm plate thickness across working widths of 1500 mm to 4000 mm, well suited to the tank, pipe, and structural fabrication work common across Oman’s oil, gas, and marine sectors. The top roll stays fixed while both bottom rolls move independently through separate hydraulic cylinders, and both bottom rolls are power-driven through a planetary gearbox with hydraulic motor for consistent torque.
A double pre-pinching arrangement reduces the flat, unrolled section left at each plate end, cutting rework on production runs. The built-in cone bending attachment adds versatility for tapered pipe sections, and the hydraulic dropper end simplifies removal of finished cylinders. Overload protection and digital readout on both bottom roll positions give operators repeatable, trackable results, and a manual centralised lubrication system keeps upkeep manageable.
Standard equipment includes an extended shaft for profile bending and digital readout, with optional hardened and ground rolls, automatic lubrication, a material feed table, NC controls, side and top support for large diameter work, top roll drive, and interchangeable top rolls. Enquire about the 3 Roll DP Series.
3 Roll HM Series Machine in Oman
The 3 Roll HM Series uses a hydraulic initial pinch design with minimum flat end pre-bending, valuable for Omani fabricators producing pressure vessels and ship hull sections where a tight, uniform curve from end to end matters for weld quality. Hydraulic top roll side movement enables conical rolling, and each roll position is controlled independently through hydraulics for precise mid-job adjustment.
Both drive rolls are powered for uniform torque distribution, reducing plate slippage during rolling, and rolls are made from high-tensile alloy steel, precision ground for consistent surface contact. The hydraulic dropper end simplifies part removal, and NC position control with digital display comes standard, with a full CNC upgrade available for fabricators scaling toward tighter tolerance production for refinery and marine-grade work. Get a quote for the 3 Roll HM Series.
4 RL DP Series Machine in Oman
The 4 RL DP Series uses a four-roll design, a fixed top roll, a pinch roll, and two independent side bending rolls, enabling single-pass pre-bending of both plate ends without reversing the sheet. For Omani fabricators working against tight refinery and dry dock project schedules at Duqm and Sohar, this significantly reduces handling time compared to a 3-roll machine.
Position control across all four rolls can be specified as CNC or NC, with digital position readout for repeatable settings between jobs. Each side roll is controlled independently through hydraulics, and both the top roll and pinch roll are driven, delivering the torque needed for heavier plate without slippage. Rolls are manufactured from high-tensile forged alloy steel, hardened and precision ground. A hydraulic dropper end simplifies removal of the finished cylinder, and CNC side roll position control supports accurate conical rolling for tapered pipeline sections.
This is the machine we recommend for high-volume Omani tank, pipe, and marine fabricators who need to maximise throughput without sacrificing plate-end accuracy. Request pricing for the 4 RL DP Series.
Frequently Asked Questions
1. Does Energy Mission ship machinery directly to Duqm, Sohar, or Salalah ports in Oman?
2. Can Energy Mission recommend machines suited to marine and shipbuilding fabrication work?
3. What machines suit fabricators supplying Oman's oil and gas midstream projects at Duqm?
4. Does Energy Mission provide documentation to support Omani import and free zone procedures?
5. What is the typical lead time for machinery ordered for delivery to Oman?
Contact Energy Mission for Metalworking Equipment in Oman
From refinery and dry dock fabrication at Duqm to construction and marine work across Sohar, Salalah, and Muscat, Energy Mission supplies the press brake, shearing, and plate rolling machines Oman’s fabrication sector depends on. Contact us here to discuss your requirements and receive a detailed quote with shipping timelines.