...
 
CNC Hyd. Press Brake :::...
NC Hyd. Press Brake :::...
NC Hyd. Shearing Machine :::...
Hyd. Shearing Machine :::...
Hydraulic Iron Worker :::...
Hyd Angle Cutting :::...
Horizontal Press :::...
Hyd. H-Frame Press :::...
Hyd. Stamping Press :::...
 
 
  CNC SYNCRO HYDRAULIC PRESS BRAKE
   
  Main
   
 
Specification ::::
 

Model Ton
MT		 Table Size (in mm) Working Height of Table (in mm) Clear Pass (in mm) Ram Stroke
 (in mm)		 Open Height
(in mm)		 Closed Height
(in mm)		 Throat Depth
(in mm)		 RAM speeds Mm/sec. Motor
HP		 Overall
Dimension
Approach Pressing Return LxBxH
(in mm)
PBS 825 80 180X2500 900 2000 150 350 200 200 100 7 80 7.5 3250x1600x2600
PBS 830 80 180x3000 900 2500 150 350 200 200 100 7 80 7.5 3750x1650x2650
PBS 1025 100 180x2500 900 2000 150 350 200 200 100 7 80 10 3250x1650x2700
PBS 1030 100 180x3000 900 2500 150 350 200 200 100 7 80 10 3750x1700x2800
PBS 1230 125 220x3000 900 2500 200 410 210 300 100 6 80 10 3750x1700x2850
PBS 1240 125 220x4000 900 3000 200 410 210 300 100 6 80 15 4800s1800s3000
PBS 1630 160 220x3000 900 2500 200 410 210 300 100 7 80 15 3750x1800x2900
PBS 1640 160 220x4000 900 3000 200 410 210 300 100 7 80 20 4800x1900x3200
PBS 2030 200 220x3000 900 2500 200 410 210 300 100 6 80 20 3800x1900x3000
PBS 2040 200 220x3000 900 3000 200 410 210 300 100 6 80 25 4800x2000x3250
PBS 2530 250 300x3000 1000 2500 200 410 210 300 80 6.5 80 25 3800x2000x3100
PBS 2540 250 300x4000 1000 3000 200 410 210 300 80 6.5 80 25 4800x2050x3250
PBS 3030 300 300x3000 1000 2500 250 500 250 300 75 5.5 80 25 3850x2050x3200
PBS 3040 300 300x4000 1000 3000 250 500 250 300 75 5.5 80 25 4850x2100x3400
PBS 4030 400 300x3000 1000 2500 300 600 300 300 55 5 80 25 3850x2100x3400
PBS 4040 400 300x4000 1000 3000 300 600 300 300 55 5 80 25 4850x2200x3600
PBS 5040 500 300x4000 1000 3000 300 600 300 300 100 6 100 40 4900x2300x3900
PBS 5050 500 300x5000 1000 4000 300 600 300 300 100 6 100 40 6000x2400x4100
PBS 5060 500 300x6000 1000 4500 300 600 300 300 100 6 100 40 7000x2500x4500
   
 
Standard Accessories ::::
 
 
  • Main Drive Motor.
  • Selection of Auto, Manual & Adjust mode.
  • HMI with 5.7” LCD, monochrome screen & numeric keypad.
  • DA-51 PS controller from Delem for Y1, Y2 & X axis.
  • Proportional hydraulics for Y1, Y2 axis.
  • Individual linear encoder for Y1 & Y2 for precise synchronization of beam movement.
  • AC Servo motor with resolver for back gauge drive.
  • Hardened & Grounded Ball screw.
  • Linear motion bearing on guide rods.
  • One suitable five way, hardened & grounded die and punch**.
  • Manual anti deflection unit.
  • Pair of sheet support.
  • Movable work station with pair of foot switch.
   
 
Optional Accessories ::::
 
 
  • Multi- axes back gauge.
  • Higher versions of controllers .
  • Special Toolings.
  • Anti-deflection unit. (motorized & automatic)
  • Sliding sheet supports with swing-away stoppers for front gauging.
  • Bed & ram horn extensions.
  • Photo-electric finger safety guards.
  • Hydraulic Tool Clamping.
  • First fill of hydraulic oil.
   
...